Firmware upgrade for multiple ip camera's at once

[normel]

Hello, i have searched thrue the forum, but have not found any topic for this.
I want to upgraded all the camera's in the same network/ They all are same type.model. and FW version is same.. all are European version. In stead of doing it one by one ( what would cost many time ) i was wondering if there is any way to upgrade them all at same time

 

[alastairstevenson]

I want to upgraded all the camera's in the same network/ They all are same type.model. and FW version is same.. all are European version. In stead of doing it one by one ( what would cost many time ) i was wondering if there is any way to upgrade them all at same time

The Batch Configuration Tool is designed for that requirement : Download | Tools - Hikvision

 

[normel]

Ok, thanks. So if the cameras are all connected to the NVR with poe ports, i have to connect the laptop to one of the poe ports in order to see the cameras in the batch tool

 

[alastairstevenson]

So if the cameras are all connected to the NVR with poe ports, i have to connect the laptop to one of the poe ports in order to see the cameras in the batch tool

Yes, that should work.