Hik-Connect and RTSP stream problem

Augustas

n3wb
Joined
Oct 23, 2018
Messages
1
Reaction score
0
Location
Lithuania
Hello,
We have encountered problem with Hikvision NVR. We are using NVR model DS-7608/7616NI-K2/8P(16P) with 8 Hikvision bullet cameras.

We would like to use Hik-Connect and RTSP feature at the same time, but Hik-Connect encrypts the video, and we can access it through RTSP feed, but we can only see encrypted video signal, gray screen with noise.

If we turn off Hik-Connect feature, RTSP stream works, but we cannot connect from remote.

Is there a way to pass encryption key in RTSP url?

Now we are using: rtsp://user: password@NVRIP: PORT/Streaming/Channels/101

Is there any way we can access our camera feed through remote connection, but also have RTSP stream in local network at the same time?

Any good alternatives for Hik-Connect?

We cannot remove RTSP, because it must be used for our clients software.

Any comments and information would be very helpful.
 

Securame

Pulling my weight
Joined
Mar 25, 2014
Messages
664
Reaction score
214
Location
Barcelona, Spain
See if from the local interface (with monitor and mouse) you can disable stream encryption on the platform access/P2P section. I have seen it on some firmwares, uncertain on which ones.
 
Top