Hikvision turret junction box options

[techip]

What are the Hikvision IP POE turret camera junction box options for the following models...

DS-2CD23x5FWD-I / specifically DS-2CD2385FWD-I & DS-2CD2345FWD-I
DS-2CD23x3G0-I / specifically DS-2CD2383G0-1 & DS-2CD2343G0-I

All these Hikvision IP cameras have the same 127.3mm diameter with a 112.4mm mounting diameter.

On Hikvision US website junction box CBM model has the correct camera mounting diameter, but the junction box diameter is 157mm & more importantly does not have inlet in center to pass CAT6 through.
On Hikvision China website the equivalent junction box is DS-1280ZJ-M to Hikvision US website.

Does CB130T(Hikvision US) / DS-1280ZJ-DM8 (Hikvision China) website fit the turret models listed above? These junction boxes do not appear to have the protrusion to fill the notch on dome cameras wire pass through for surface mount without junction box.

TIA

 

[Defcon]

The DS-1280ZJ-M is for the 2385 etc
The 2383G0 is a Chinese model? The DS-2CD2385G1-I is the model we use here in Europe and uses the junction box DS-1280ZJ-DM21
However these boxes are bigger than the camera which I never liked so the DM8 could be a flush fit but I might have to get one and test.

 

[techip]

The DS-2CD2383G0-I is the model on Hikvision USA website. I can confirm the CB130T / DS-1280ZJ-DM8 is designed for turrets with 112.4mm mounting diameter.