Hikvsion NVR smart events

TSAN

n3wb
Joined
Jul 16, 2019
Messages
15
Reaction score
4
Location
USA
Hi,

Is there any special setting I'm overlooking to get a Hikvision NVR to move a ptz camera to the appropriate location / frame where a smart event was created.

It does this when configured on Camera side. But on NVR side it will not move camera which makes config far more complicated in comparison to configuring directly on camera which will move to exact position.

But if configured on Camera there are inconsistencies on NVR side. For example - Line cross won't sync up to NVR when configured on camera side. Alerts/notifications work, but NVR will just be blank of line cross config.
With intrusion configured on camera side it does sync up and show on NVR side. But still no automatic movement when selecting intrusion #.


I like things central and simple. Anything overlooking to get NVR to move PTZ where it was actually configured? Also finding Motion event expert mode unavailable on NVR side. Anyway to get it centrally managed as well?

NVR = DS-7616NI-Q2/16P
Cam = DS-2DE4A425IW-DE

Thank you.
 
Top