How to setup "presets by time" not by duration?

[42er]

Hello,

I want to choose presets by time, not by duration:

7:00 am = preset 1
7:30 am = preset 2
9:00 am = preset 1
11:00 am = preset 3
3:00 pm = preset 1
5:00 pm = preset 4
8:00 pm = preset 2
10:00 pm = preset 4 (stays the hole night, till 7:00 am = preset 1)

How can I configure/setup that with SmartPSS or WebIF?

Regards 42er

 

[42er]

My question regards to my 5x dome cameras Dahua SD59430U-HNI. Each with 10+ presets.

Firmware: 2.623.0000000.1.R (build: 2018-06-27)

SmartPSS: 2.02.1 (date: 2018-06-19)

 

[looney2ns]

Blue Iris can do this, I don't see a way to do it directly in the cams GUI.

 

[jack7]

"Time Task" should work if it's one of your PTZ functions in Settings, and your camera allows enough time tasks. Below is a link to a pdf that shows Dahua Time Task. I don't know what cameras this manual applies to, if the software is available, or if your camera firmware supports it. I just did a Google search.
https://www.mayflex.com/sites/default/files/pdf/SDAH003/Dahua-Network-Speed-Dome-Web3_0-Operation-Manual-V1_0_0-201805226.pdf
I have used Time Task. It is available via the Amcrest Web interface for Amcrest cameras like the IP4M-1053E which is somewhat like your camera. Amcrest is a Dahua OEM.