Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

[nayr]

is other port supposed to be :80 or just 80 (without comma)?

 

[BillG]

well that is madening because even when I set the discovery port to 80, I get no signal, check port/user/password.

Well I don't have that cam but it works on 2 dahua ptz's that I have, so thought it was worth a shot.

 

[hmjgriffon]

is other port supposed to be :80 or just 80 (without comma)?

:80 is how it is when you check off the box, you can add an IP, I can try it without the colon.

 

[hmjgriffon]

nope lol I dunno what looney did, he's magic.

 

[nayr]

same firmware versions? Ive seen people do firmware updates and break the PTZ.. but it broke it in SmartPSS/WebUI, not specifically ONVIF.

 

[hmjgriffon]

same firmware versions? Ive seen people do firmware updates and break the PTZ.. but it broke it in SmartPSS/WebUI, not specifically ONVIF.

I haven't done anything to the firmware and I really don't want to unless there is a really really compelling reason to. This is what I have.

 

[ldasilva]

This is what I have, with no joy, also I've noticed when I try to view the stream and things with onvif it asks for a username and password even when I turn off onvif authentication.
View attachment 14063 View attachment 14064 View attachment 14065

uncheck the use another ip/port

 

[hmjgriffon]

for anyone else, I disabled onvif authentication in the camera and rebooted it, now when I run inspect I get this, and it auto changes the path and discovery port and stuff, but still shows no signal.

Opening port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2017-01-15T05:52:31.000Z
Requesting device information...
Manufacturer: General
Model: SD59225U-HNI
FirmwareVersion: 2.420.General 00.9.R, build: 2016-07-12
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging_service
Has media services: /onvif/media_service
Has RTP_RTSP_TCP, requesting profiles
first profile is MediaProfile000
first source is 000
requesting URI for profile MediaProfile000
RTSP URI: /cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Has Event services: /onvif/event_service
RelayOutputs: 1
RelayOutput: 000/Monostable/closed
InputConnectors: 2
Has Device IO services: /onvif/deviceIO_service
AudioOutputs: 1
Has PTZ service: /onvif/ptz_service
Done

 

[ldasilva]

for anyone else, I disabled onvif authentication in the camera and rebooted it, now when I run inspect I get this, and it auto changes the path and discovery port and stuff, but still shows no signal.

Opening port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2017-01-15T05:52:31.000Z
Requesting device information...
Manufacturer: General
Model: SD59225U-HNI
FirmwareVersion: 2.420.General 00.9.R, build: 2016-07-12
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging_service
Has media services: /onvif/media_service
Has RTP_RTSP_TCP, requesting profiles
first profile is MediaProfile000
first source is 000
requesting URI for profile MediaProfile000
RTSP URI: /cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Has Event services: /onvif/event_service
RelayOutputs: 1
RelayOutput: 000/Monostable/closed
InputConnectors: 2
Has Device IO services: /onvif/deviceIO_service
AudioOutputs: 1
Has PTZ service: /onvif/ptz_service
Done

wonder if it has to do with the firmware
mines a little newer
if @looney2ns post his firmware version then we can match the 2

 

[hmjgriffon]

wonder if it has to do with the firmware
mines a little newer
if @looney2ns post his firmware version then we can match the 2

SUCCESS!!!! I took the onvif part off so now the path is

/cam/realmonitor?channel=1&subtype=0&unicast=true

and it works! That other dude that was here earlier needs to try it lol.

 

[smiticans]

Thanks! I got it to work! @ldasilva what firmware version are you running? The version I have seems to be a little glitchly. Hopefully I can get the Auto tracking and line cross to work better tomorrow.

 

[hmjgriffon]

Thanks! I got it to work! @ldasilva what firmware version are you running? The version I have seems to be a little glitchly. Hopefully I can get the Auto tracking and line cross to work better tomorrow.

Yeah, I haven't even touched auto tracking yet haha.

 

[ldasilva]

Thanks! I got it to work! @ldasilva what firmware version are you running? The version I have seems to be a little glitchly. Hopefully I can get the Auto tracking and line cross to work better tomorrow.

I have the non I model so it's a little different but shouldn't be by much

 

[hmjgriffon]

Here is an example of the auto tracking. I set it up as intrusion for the cul-de-sac.

Okay so I am playing with auto tracking, I tried tripwire and intrusion, the camera sees me and then just spins around in a circle, stops, and goes back to the preset, do I need to mess with the draw target thing at all? I tried rebooting the camera.

 

[nayr]

yeah you need to draw lines and define min/max size

 

[hmjgriffon]

yeah you need to draw lines and define min/max size

Yeah the help file sucks and doesn't really explain what the target setting does.

 

[wantafastz28]

Dahua has videos on YouTube showing how to set it up, didn't Andy post it a while back?

 

[hmjgriffon]

Dahua has videos on YouTube showing how to set it up, didn't Andy post it a while back?

Maybe, if anyone has a link that would be awesome, I googled setting it up in general and found videos of people setting up auto tracking with dahua stuff but all of the settings were different so it wasn't much help.

 

[wantafastz28]

Brb, gonna Google, dahua auto tracking setup.

 

[wantafastz28]

The more and more I stay here, I don't know how nayr and fenderman keep their patience.....people either need to just pay someone to install this stuff or start learning to research. A lot of this stuff can be found faster with Google, then making a thread or post, and waiting for someone to do the work for them. I feel like an asshole asking for something that has already been posted and I miss it in a search.