Integrated PoE ports in NVR?

[mikecorr]

Where in the product specifications would it be shown If an NVR needs a separate PoE switch to power the cameras? For example, I need a hybrid HDCVI DVR and was looking at the Dahua X82B2A; looking at the spec sheet, it's I'm not sure if has integrated PoE ports (but I suspect it does not).

https://us.dahuasecurity.com/wp-content/uploads/2018/07/Datasheet_8ch_4K_Analytics_HDCVI_DVR_X82B2A_001_003.pdf

 

[TonyR]

Where in the product specifications would it be shown If an NVR needs a separate PoE switch to power the cameras? For example, I need a hybrid HDCVI DVR and was looking at the Dahua X82B2A; looking at the spec sheet, it's I'm not sure if has integrated PoE ports (but I suspect it does not).

You will need a POE switch or injectors for the cams; the giveaway is in how the NVR is powered, which is 12VDC @ 4 Amps, if the NVR provided POE to the cams the input would be either 120/240 VAC for an internal power supply or there would be an external power supply from 48 to 52VDC.

But I don't see 8 RJ-45 jacks on the rear for cams either.

 

[mikecorr]

the giveaway is in how the NVR is powered,

But I don't see 8 RJ-45 jacks on the rear for cams either.

These are the parts I was missing. Thanks.

 

[bigredfish]

I dont think any of the hybrid XVR’s have built in PoE ports. Just the ports for the analog cameras. Run XVR ethernet port to a switch and connect to IP cameras from there.