ip dome camera - weatherproof bits

arkiboys

n3wb
Joined
Dec 18, 2017
Messages
2
Reaction score
0
Hello,
I am learning how to setup the kit by myself... :)
ip dome camera --> H.265+
junction box(I hope I have the name right - the box sitting under the camera to hold the two cables coming out of camera)
--> DS-1280ZJ-DM18
I have seen a lot of videos regarding my query but nothing answers it yet.
At present I connect the IP dome camera using the POE cable to the NVR and works good.
Now I want to place the camera on the outside wall of the house using the junction box to hold the extra cables coming out from the camera.
Question:
how do I place the POE cable through the waterproof bits that come with the dome camera ? Do I really have to take off the cable head (The bit that clips into the camera connector) first and then pass the cable through the waterproof bits and then place the head back on?!
These are the videos that show but is this the only way ?
Thank you
 

mat200

IPCT Contributor
Joined
Jan 17, 2017
Messages
13,670
Reaction score
22,774
Top