IPC-HDW2231RP-ZS doesn't show IVS

nelsonr

n3wb
Joined
Sep 1, 2019
Messages
12
Reaction score
6
Location
Maryland
Thanks to everyone on this forum for the good information! I just purchased my first CCTV camera, the IPC-HDW2231RP-ZS, from Empire Tech/Andy on Amazon. When I go into the settings, under "Event" I only see "Video Detection" and "Abnormality". I don't see the "IVS" option, which is where I would expect to see Tripwire and Intrusion. The Upgrade section says I'm on the latest firmware. What am I missing? Thanks!
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
Thanks to everyone on this forum for the good information! I just purchased my first CCTV camera, the IPC-HDW2231RP-ZS, from Empire Tech/Andy on Amazon. When I go into the settings, under "Event" I only see "Video Detection" and "Abnormality". I don't see the "IVS" option, which is where I would expect to see Tripwire and Intrusion. The Upgrade section says I'm on the latest firmware. What am I missing? Thanks!
disable smart codec
 
Top