IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

Wael

Getting the hang of it
Joined
May 9, 2019
Messages
125
Reaction score
33
Location
California
I didn't understand it either, and then it just hit me, but it hit me very hard with the cams aborting every few minutes and multiple reboots.
I amusing Blue Iris, so yes it could be that, it could be the camera model I am using, but whatever I think enough have been hit hard with this it should be withdrawn.
My cams are isolated, so I will happily just stick on v13 with the rest on v15.
I agree with you in that it should be pulled until at least there is more info on the matter. This is strange. Anyhow I downgraded to 15 on all my cams due to the IVS bug.
 

Wael

Getting the hang of it
Joined
May 9, 2019
Messages
125
Reaction score
33
Location
California
Anybody has a previous version firmware? The 13, is removed from Andy's thread.
It seems like, Dahua removed the firmware tabs from their site.
Yes I have 13 and 15. Let me zip them up together and private message you a drop box link.
 

spammenotinoz

Getting comfortable
Joined
Apr 4, 2019
Messages
345
Reaction score
274
Location
Sydney
Anybody has a previous version firmware? The 13, is removed from Andy's thread.
It seems like, Dahua removed the firmware tabs from their site.
Sorry on my mobile, but I downloaded it from Dahua about 4 hours ago.
 

IAmATeaf

Known around here
Joined
Jan 13, 2019
Messages
3,287
Reaction score
3,252
Location
United Kingdom
All of my 6 5231-ze cams are running this firmware with IVS enabled on 3 of them and I’ve had no issues.

My normal procedure is to backup the cam config, flash the cam, then reset it to defaults, then restore the backed up config.
 

spammenotinoz

Getting comfortable
Joined
Apr 4, 2019
Messages
345
Reaction score
274
Location
Sydney
All of my 6 5231-ze cams are running this firmware with IVS enabled on 3 of them and I’ve had no issues.

My normal procedure is to backup the cam config, flash the cam, then reset it to defaults, then restore the backed up config.
Yes, didn't help in this case. Other have reported they couldn't even restore the backed up config.
 

Dave Lonsdale

Pulling my weight
Joined
Dec 3, 2015
Messages
456
Reaction score
195
Location
Congleton Edge, UK
Yes, didn't help in this case. Other have reported they couldn't even restore the backed up config.
Happened to see this thread. I’ve always thought that if there’s significant change to the firmware, it‘s reasonable to believe that putting the old config back will not work properly for all parameters?

Anyway, I reverted to v13 months ago and sticking with it.
 

sebastiantombs

Known around here
Joined
Dec 28, 2019
Messages
11,511
Reaction score
27,690
Location
New Jersey
I've been watching this thread, too. I only have one 5231R-ZE but it's been on "16" since Andy listed it and it has yet to reboot, hang or mess up in any way.
 

MrGlasspoole

Young grasshopper
Joined
Mar 10, 2018
Messages
66
Reaction score
17
I updated IPC-HDW5231R-Z and IPC-HDW5431R-Z to V2.800.0000016.0.R and every time the cams
get unplugged and plugged in again they lose the Sub Stream settings.

Does somebody have v15 for me?
 
Joined
Aug 8, 2018
Messages
7,386
Reaction score
25,889
Location
Spring, Texas
Regarding the reboot problem...are you using SD cards? Check how full they are. I had a problem after upgrading firmware where they did random reboots. After looking into various 'solutions', I reformatted the SD cards in all three and have yet to have a reboot in three days.
 
Joined
Dec 7, 2018
Messages
1
Reaction score
1
Location
UK
I updated IPC-HDW5231R-Z and IPC-HDW5431R-Z to V2.800.0000016.0.R and every time the cams
get unplugged and plugged in again they lose the Sub Stream settings.

Does somebody have v15 for me?
Exactly the same thing here.
2x IPC-HDW5431R-ZE with V2.800.0000016.0.R, Build Date: 2020-06-05

after reboot
  • video \ sub stream 01 disabled -> enabled
  • video \ sub stream 02 enabled -> disabled (including settings within are reset to defaults)
  • audio \ sub stream 01 disabled -> enabled
  • audio \ sub stream 02 enabled -> disabled

I'm going to try 13 from the website as my cameras can't talk out anyway.

incidently, dahua website lists NP and PN. I understand that all dahua f/w supports both pal and ntsc. but i don't understand why on the main website they need to list two images if they are both the same and both pal and ntsc.
 

davw

Getting the hang of it
Joined
Mar 7, 2017
Messages
147
Reaction score
30
Location
England
i am having issues with v16 please can someone direct me to a more reliable version
I am unable to get nvr to accept it
 

Mc2472

n3wb
Joined
Jun 24, 2018
Messages
10
Reaction score
1
Location
Florida
Here is the latest new firmware for these models
This new firmware is a important update, Please try to update asap.


Models support.

IPC-HDW5231R-Z/ZE
IPC-HFW5231E-Z/Z5/Z12/ZE/Z5E/Z12E
IPC-HDBW5231R-Z/ZE
IPC-HDBW5231E-Z/ZE
IPC-HDW4231EM-AS/ASE, IPC-HDBW4231F-AS, IPC-HDBW4231E-AS/ASE , IPC-HFW4231S,IPC-HFW4231E-S/SE.
IPC-HDBW4431F-AS
IPC-HDW4XXX-ASE
IPC-HDW5XX-ZE
IPC-HFW5XXX-ZE, IPC-HFW5231E-Z12E, IPC-HFW5231E-Z5E
IPC-HFW4239T-ASE
IPC-HDBW4239R-ASE
IPC-HFW4239T-ASE
IPC-HDW5831R-ZE
IPC-HDW5631R-ZE
IPC-HDW4831EM-ASE
IPC-HDBW4831E-ASE
Here is the latest new firmware for these models
This new firmware is a important update, Please try to update asap.


Models support.

IPC-HDW5231R-Z/ZE
IPC-HFW5231E-Z/Z5/Z12/ZE/Z5E/Z12E
IPC-HDBW5231R-Z/ZE
IPC-HDBW5231E-Z/ZE
IPC-HDW4231EM-AS/ASE, IPC-HDBW4231F-AS, IPC-HDBW4231E-AS/ASE , IPC-HFW4231S,IPC-HFW4231E-S/SE.
IPC-HDBW4431F-AS
IPC-HDW4XXX-ASE
IPC-HDW5XX-ZE
IPC-HFW5XXX-ZE, IPC-HFW5231E-Z12E, IPC-HFW5231E-Z5E
IPC-HFW4239T-ASE
IPC-HDBW4239R-ASE
IPC-HFW4239T-ASE
IPC-HDW5831R-ZE
IPC-HDW5631R-ZE
IPC-HDW4831EM-ASE
IPC-HDBW4831E-ASE
Here is the latest new firmware for these models
This new firmware is a important update, Please try to update asap.


Models support.

IPC-HDW5231R-Z/ZE
IPC-HFW5231E-Z/Z5/Z12/ZE/Z5E/Z12E
IPC-HDBW5231R-Z/ZE
IPC-HDBW5231E-Z/ZE
IPC-HDW4231EM-AS/ASE, IPC-HDBW4231F-AS, IPC-HDBW4231E-AS/ASE , IPC-HFW4231S,IPC-HFW4231E-S/SE.
IPC-HDBW4431F-AS
IPC-HDW4XXX-ASE
IPC-HDW5XX-ZE
IPC-HFW5XXX-ZE, IPC-HFW5231E-Z12E, IPC-HFW5231E-Z5E
IPC-HFW4239T-ASE
IPC-HDBW4239R-ASE
IPC-HFW4239T-ASE
IPC-HDW5831R-ZE
IPC-HDW5631R-ZE
IPC-HDW4831EM-ASE
IPC-HDBW4831E-ASE
Here is the latest new firmware for these models
This new firmware is a important update, Please try to update asap.


Models support.

IPC-HDW5231R-Z/ZE
IPC-HFW5231E-Z/Z5/Z12/ZE/Z5E/Z12E
IPC-HDBW5231R-Z/ZE
IPC-HDBW5231E-Z/ZE
IPC-HDW4231EM-AS/ASE, IPC-HDBW4231F-AS, IPC-HDBW4231E-AS/ASE , IPC-HFW4231S,IPC-HFW4231E-S/SE.
IPC-HDBW4431F-AS
IPC-HDW4XXX-ASE
IPC-HDW5XX-ZE
IPC-HFW5XXX-ZE, IPC-HFW5231E-Z12E, IPC-HFW5231E-Z5E
IPC-HFW4239T-ASE
IPC-HDBW4239R-ASE
IPC-HFW4239T-ASE
IPC-HDW5831R-ZE
IPC-HDW5631R-ZE
IPC-HDW4831EM-ASE
IPC-HDBW4831E-ASE
I downloaded the firmware update for the 5231. It looked like it finished fine but I’m unable to connected to the camera. It says site can’t be reached. The assigned IP refused to connect. I thought maybe it reset and tried to search it as new but that didn’t work either. Any ideas how to fix it?
 

Wael

Getting the hang of it
Joined
May 9, 2019
Messages
125
Reaction score
33
Location
California
Try open the camera and hold down the reset button for about 15 seconds.
 

Mc2472

n3wb
Joined
Jun 24, 2018
Messages
10
Reaction score
1
Location
Florida
Try open the camera and hold down the reset button for about 15 seconds.
Thanks - I tried that several times with no luck. I tried the default IP. The IP I set it at and Config tool. still not connecting.
 

Mc2472

n3wb
Joined
Jun 24, 2018
Messages
10
Reaction score
1
Location
Florida
Try open the camera and hold down the reset button for about 15 seconds.
[/QUOTE
Try open the camera and hold down the reset button for about 15 seconds.
Thanks for your help - after the reset, I unplugged the power for for a few seconds. After that, config tool was able to find the camera.
 
Joined
Aug 8, 2018
Messages
7,386
Reaction score
25,889
Location
Spring, Texas
The hard reset (reset button) needs to be done with power supplied to the cam. Was it plugged into a POE switch? Did the green light come on, the one in the photo below?

IMG_1559.JPG
 

cam26

Getting the hang of it
Joined
Jan 21, 2019
Messages
233
Reaction score
97
Location
USA
I’ve always been terrified to do any firmware updates on cameras. I’ve had my 5231’s for about 2 years and have never updated because I don’t want to fix something that’s not broken and potentially cause it to break or not function perfectly as it has for the last 2 years.

Is this ok? They are completely isolated from the internet. I’m sure I’m missing out on some updated features but, once again, they work perfectly for me as is.
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,448
Reaction score
47,588
Location
USA
I’ve always been terrified to do any firmware updates on cameras. I’ve had my 5231’s for about 2 years and have never updated because I don’t want to fix something that’s not broken and potentially cause it to break or not function perfectly as it has for the last 2 years.

Is this ok? They are completely isolated from the internet. I’m sure I’m missing out on some updated features but, once again, they work perfectly for me as is.
Absolutely that is perfect. Only update if it is known to fix an issue you are having! Most of mine have never been updated for that very reason.
 

cam26

Getting the hang of it
Joined
Jan 21, 2019
Messages
233
Reaction score
97
Location
USA
Absolutely that is perfect. Only update if it is known to fix an issue you are having! Most of mine have never been updated for that very reason.
I’m glad I’m not the only one! Thank you for your reassurance.
 
Top