IPC-HFW4431R-Z - How to get PTZ to work?

rokatx

n3wb
Joined
Jan 20, 2017
Messages
4
Reaction score
0
Hi Guys,

I've been a silent reader and BlueIris user for a long time.
I just received my IPC-HFW4431R-Z today and have everything running but the zoom.
PTZ Controls are enabled but it doesn't actually zoom. I wonder if I selected the right options?
None of the three available Dahua options under Network IP on the PTZ tab are working.
I'm running the Camera via a Netgear GS728TPP PoE+ switch.

upload_2017-1-19_23-40-42.png

This has to be a BlueIris config issue, no?


Thanks!
rokatx
 

Attachments

mcx

Pulling my weight
Joined
Mar 26, 2014
Messages
98
Reaction score
102
Try Dahua HFW2300R-Z/2320R-ZS/81200E
 

rokatx

n3wb
Joined
Jan 20, 2017
Messages
4
Reaction score
0
no luck. What configuration is everyone else using for this model?
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
try using find inspect so it pulls the onvif profile...then in the ptz select onvif..
 

rokatx

n3wb
Joined
Jan 20, 2017
Messages
4
Reaction score
0
didn't work either. It recognizes the camera via find/inspect but ONVIF won't do anything.
 

randytsuch

Pulling my weight
Joined
Oct 1, 2016
Messages
495
Reaction score
176
I had to go to the camera's ip address, and set the zoom from there.
I don't plan to change zoom, so no biggie that I can't change in BI.
 

rokatx

n3wb
Joined
Jan 20, 2017
Messages
4
Reaction score
0
You're a hero, BillG!
That "use another ip/port" with the setting of :80 fixed it.
Didn't think this was needed.

Thanks a bunch!
 
Top