IPC-T2231T-ZS IPC-T2431T-AS 2022 IPC-HX2XXX-Molec_MultiLang_PN_V2.820.0000000.48.R.220614.bin

Skid24

n3wb
Joined
Feb 9, 2021
Messages
1
Reaction score
0
Location
Canada
Hi Andy,

I have a IPC-2231T-ZS purchased last March that will not update with the firmware in this thread.

Just gives a message saying the update package is invalid and the update has failed.

1612899942342.png

Any ideas?

Thanks.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,258
Reaction score
23,711
Location
HONGKONG
Hey guys

This firmware has some important upgrade, please try to make upgrade to the camera asap.
See page 1 for the download link.

Andy
 

Hogger

n3wb
Joined
Jul 24, 2021
Messages
4
Reaction score
1
Location
AR USA
The first file (General_IPC-HX2XXX-Molec_MultiLang_PN_V2.820.0000000.33.R.210705.bin) hangs at "Transmitting files..., please don't leave this page or close the browser..."
This file (General_IPC-HX25(8)XX-Molec_MultiLang_PN_V2.820.0000000.33.R.210705.bin) finishes transmitting but results in "Update package invalid and update failed. Device will reboot immediately."
Any Suggestions?
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,258
Reaction score
23,711
Location
HONGKONG
The first file (General_IPC-HX2XXX-Molec_MultiLang_PN_V2.820.0000000.33.R.210705.bin) hangs at "Transmitting files..., please don't leave this page or close the browser..."
This file (General_IPC-HX25(8)XX-Molec_MultiLang_PN_V2.820.0000000.33.R.210705.bin) finishes transmitting but results in "Update package invalid and update failed. Device will reboot immediately."
Any Suggestions?
Use the configtool to finish the upgrading.
 

Hogger

n3wb
Joined
Jul 24, 2021
Messages
4
Reaction score
1
Location
AR USA
Configtool does not detect this camera although it does detect two identical cams on the same network. The problematic camera is accessible and is working fine except for the settings in Camera > Conditions > Day & Night (set at Auto, Medium and 6s) are greyed out and can't be changed.
Do I need to enable some service to for Configtool to detect this cam?
 

looney2ns

IPCT Contributor
Joined
Sep 25, 2016
Messages
15,521
Reaction score
22,657
Location
Evansville, In. USA
Be sure you are using Internet Explorer to do the update.
Best practices:
1-Set cam back to factory defaults.
2-Update firmware
3-Reset once again to factory defaults.
4-Set camera back up from scratch, not by importing a saved config file.
 

hsimah

n3wb
Joined
Jul 19, 2020
Messages
17
Reaction score
11
Location
Queensland, Australia
I tried the file via web browser and configtool software and both fail.

When using configtool I get the message 'wait for try'.

When using web browser it gets stuck on transmitting files.

Have been able to upgrade other model cameras with no issues, seems this specific model sold by Andy might be problematic?

Specs of my two IPC-T2431T-AS

Code:
System VersionV2.800.0000000.16.R, Build Date: 2020-04-18
WEB VersionV3.2.1.880675
ONVIF Version19.06(V2.6.1.845551)
S/N6G20B07DN2E1439
Security Baseline VersionV2.1
Code:
System VersionV2.800.0000000.16.R, Build Date: 2020-04-18
WEB VersionV3.2.1.880675
ONVIF Version19.06(V2.6.1.845551)
S/N6G20B07DN2E1441
Security Baseline VersionV2.1
 
Last edited:

hsimah

n3wb
Joined
Jul 19, 2020
Messages
17
Reaction score
11
Location
Queensland, Australia
:winktongue:
I tried the file via web browser and configtool software and both fail.

When using configtool I get the message 'wait for try'.

When using web browser it gets stuck on transmitting files.

Have been able to upgrade other model cameras with no issues, seems this specific model sold by Andy might be problematic?

Specs of my two IPC-T2431T-AS

Code:
System VersionV2.800.0000000.16.R, Build Date: 2020-04-18
WEB VersionV3.2.1.880675
ONVIF Version19.06(V2.6.1.845551)
S/N6G20B07DN2E1439
Security Baseline VersionV2.1
Code:
System VersionV2.800.0000000.16.R, Build Date: 2020-04-18
WEB VersionV3.2.1.880675
ONVIF Version19.06(V2.6.1.845551)
S/N6G20B07DN2E1441
Security Baseline VersionV2.1
Any update?
 

hsimah

n3wb
Joined
Jul 19, 2020
Messages
17
Reaction score
11
Location
Queensland, Australia
My cameras that I have been able to upgrade to .33.R aren't able to be accessed using the Dahua DMSS app / P2P.

Whereas my cameras still on .16.R can still be accessed in the DMSS app / P2P.

Is this a bug? Or caused by new settings?
 

Sintei

n3wb
Joined
Sep 19, 2018
Messages
7
Reaction score
2
Location
Sweden
I have the same problem, can't update IPC-T2431T-AS with neither firmware.


System Version

V2.800.0000000.14.R, Build Date: 2020-02-29

WEB Version

V3.2.1.857734

ONVIF Version

19.06(V2.6.1.845551)
S/N

6D4C6B39E7D2973

Algorithm Version

1.0.0

Security Baseline Version

V2.1
 

jstrom

n3wb
Joined
Jul 19, 2015
Messages
13
Reaction score
4
I had an issue with one of my cameras, it failed upgrade in Firefox, just got stuck after submitting file in web UI. Network inspector showed that it just uploaded part of the file, it seemed. Switched to Chromium, and it worked directly.

Weird thing though, worked perfectly fine for some identical cameras.
 

Sintei

n3wb
Joined
Sep 19, 2018
Messages
7
Reaction score
2
Location
Sweden
I still can't update my cameras. It still hangs on "transmitting files".
Yes, I've factory reset the cameras. I tried chromium, internet explorer, chrome. from windows 10 as well as linux.
 
Top