Latest New 20190111 Firmware for DH_IPC-HX5X3X-Rhea

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
3,085
Reaction score
5,828
Location
HONGKONG
Hey guys

Here we go for the latest new firmware (with Dahua logo )for the IPC-HxW5XXX, this suits for most cams we posted here, before updating, please check carefully if your camera support or not.

Firmware with dahua logo, ntsc/pal on the same firmware. Seems new stock are using the latest new firmware now.


IPC-HDW5231R-Z/ZE
IPC-HFW5231E-Z/Z5/Z12/ZE/Z5E/Z12E
IPC-HDBW5231R-Z/ZE
IPC-HDBW5231E-Z/ZE
IPC-HDW4231EM-AS/ASE, IPC-HDBW4231F-AS, IPC-HDBW4231E-AS/ASE , IPC-HFW4231S,IPC-HFW4231E-S/SE.
IPC-HDW5XX-ZE
IPC-HFW5XXX-ZE
IPC-HFW4239T-ASE
IPC-HDBW4239R-ASE


We will starts Chinese new year holiday from Jan.29th.-Feb.11th. Orders can't process during this time. But we will have stock at Amazon US warehouse, if any urgent orders, can book all there.

Thank you!

Andy
 
Last edited:

johz

n3wb
Joined
Jan 9, 2018
Messages
17
Reaction score
8
Location
the Netherlands
Thanks Andy. Had to try it out..
In this version the automatic change between day and night settings can be selected (like in 2.640 180523) and the camera's video stream is shown in the camera's webbrowser. Yeah!
 

SkyLake

Pulling my weight
Joined
Jul 30, 2016
Messages
318
Reaction score
219
After you upgrade to this firmware, you cannot downgrade to a previous firmware...

"The upgrade package version is too low, failed to upgrade! Some functions of the device has been disabled, restart device now?"

I upgraded the firmware, and noticed that i cannot use the WDR function anymore in the night setting. The option is there, but it changes nothing, Version 23-05-2018 had no issue with WDR.

Not liking this at all..
 

gabe323

n3wb
Joined
Jan 15, 2017
Messages
22
Reaction score
16
My Z12E was rebooting 5 seconds after coming back online in BI after I upgraded to this firmware. I powered it down and back up and that made it last about 40 seconds before restarting so now I'm trying a hard reset.
 

SkyLake

Pulling my weight
Joined
Jul 30, 2016
Messages
318
Reaction score
219
This firmware is messed up... Tried a factory reset, and it does not show up in the NVR to be Initialized, or the config tool..

Well, that will be a climb on the ladder in the morning, to try a hard reset. Not recommending this upgrade!
 

gabe323

n3wb
Joined
Jan 15, 2017
Messages
22
Reaction score
16
This firmware is messed up... Tried a factory reset, and it does not show up in the NVR to be Initialized, or the config tool..

Well, that will be a climb on the ladder in the morning, to try a hard reset. Not recommending this upgrade!
Mine is still rebooting after the hard reset so now it's Uninitialized and rebooting itself. Trying to be quick about it won't help either since the camera settings page was 404 even while the camera was online for the 5-40 seconds it worked.
 

Q™

IPCT Contributor
Joined
Feb 16, 2015
Messages
4,412
Reaction score
3,098
Location
Megatroplis, USA
Ain't no sunrise/sunset in the dark hole I call "The Warehouse" where the lights are turned on and off and on and off many times each day. A problem exacerbated by my Qonfusion as to which previous Dahua firmware allowed the camera to switch between day/night settings as warranted by camera detected light levels. v2.640 180523 perhaps? Dunno and dunno where to DL it. </sad!>
 

Q™

IPCT Contributor
Joined
Feb 16, 2015
Messages
4,412
Reaction score
3,098
Location
Megatroplis, USA
Doh! Hey thanks for that @tangent.

It appears I’m looking for this firmware: DH_IPC-HX5X3X-Rhea_Internal_PN_Stream3_V2.640.0000002.0.R.180523.bin

Which is available in this topic: 20180523 Firmware for DH_IPC-HX5X3X-Rhea

I make this statement based upon topic post #2...

I can confirm, this does switch day/night profiles automatically based on available light. No more scripts and tools!!! You do however, have to specify "Day/Night" in the new Profiles Management settings.

CFD23532-63FC-4E0B-A4B9-858C97B98A99.png
I just need to read through the entire topic to determine how fuQed I will be by this firmware. :wtf:
 
Last edited:

aDEO

n3wb
Joined
Nov 21, 2018
Messages
11
Reaction score
1
Location
EU
No issue at all here with this new FW, but I've performed a partial reset from the GUI prior the upgrade.
 

Walrus

Getting comfortable
Joined
Nov 19, 2018
Messages
519
Reaction score
359
Location
Ontario
Andy also posted new firmware for the 2x3x series cameras, and I updated my 2231s. Day/night is now available under profile on them too now.. however, it doesn't let you force color at night, as under the conditions tab, the day/night is forced to auto and grayed out. I want the day profile with WDR, and the night profile still in color but with WDR off. I can't do this.
 

Q™

IPCT Contributor
Joined
Feb 16, 2015
Messages
4,412
Reaction score
3,098
Location
Megatroplis, USA
Andy hasn't pulled it. It is still available in Andy's topic OP...

20180523 Firmware for DH_IPC-HX5X3X-Rhea

Reviewing some of my home cameras, I see I installed "General_IPC-HX5X3X-Rhea_Internal_PN_Stream3_V2.640.0000002.0.R.180523.bin" on several of my cameras seven (7) months ago, and -- as I have noticed any abhorrent behavior on any of these cameras -- I have to conclude that this firmware appears to run fine on the following cameras...
  • IPC-HDBW4231F-AS
  • IPC-HDW5231R-Z
  • IPC-HDW4231EMP-ASE
  • IPC-HDW4231EM-AS
screenshot.jpg
 
Top