Latest New NVR4XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,260
Reaction score
23,722
Location
HONGKONG
Here are the models that suit this firmware.( Attention only -4KS2 model can use this firmware. )

NVR4104-4KS2,
NVR4108-4KS2,
NVR4116-4KS2,
NVR4104-P-4KS2,
NVR4108-P-4KS2,
NVR4108-8P-4KS2, Amazon.com: Loryta NVR4108-8P-4KS2 8 Channel Smart 1U 8PoE 4K&H.265 Lite Network Video Recorder English Version
NVR4116-8P-4KS2,
NVR4104HS-4KS2,
NVR4108HS-4KS2
NVR4116HS-4KS2
NVR4104HS-P-4KS2,
NVR4108HS-P-4KS2,
NVR4108HS-8P-4KS2,
NVR4116HS-8P-4KS2,
NVR4208-4KS2,
NVR4216-4KS2,
NVR4232-4KS2,
NVR4204-P-4KS2,
NVR4208-8P-4KS2, Amazon.com : Dahua 8 Channel NVR DHI-NVR4208-8P-4KS2 1U 8PoE 4K H.265 Lite Network Video Recorder Original English Version
NVR4216-16P-4KS2, Amazon.com : Dahua NVR 16 Channel NVR4216-16P-4KS2, 1U 16PoE 4K&H.265 Lite Network Video Recorder Original English Version(Support Firmware upgrade)

NVR4232-16P-4KS2,
NVR4416-4KS2,
NVR4432-4KS2,
NVR4416-16P-4KS2,
NVR4432-16P-4KS2,
NVR4816-4KS2,
NVR4832-4KS2,
NVR4816-16P-4KS2,
NVR4832-16P-4KS2

The links ones are the hot models.
 

Attachments

Last edited:
As an Amazon Associate IPCamTalk earns from qualifying purchases.

awonson

Pulling my weight
Joined
Feb 7, 2020
Messages
146
Reaction score
147
Location
Australia
Been running this firmware for the past couple of hours on my NVR4108-P-4KS2. Upgraded over the top of the February firmware version and then defaulted the NVR after the update. Seems to be working well so far.
 

KCO

Young grasshopper
Joined
Dec 28, 2019
Messages
30
Reaction score
10
Location
Santiago
It seems that it has a bug when watching MD clips, the video gets stuck after a few seconds
 

MikeyTech8

Getting comfortable
Joined
Apr 30, 2019
Messages
141
Reaction score
59
Location
Oceania
It seems that it has a bug when watching MD clips, the video gets stuck after a few seconds
I've just tested this firmware and I seem to be getting a similar issue as you when watching IVS clips via iDmss app. It seems viewing the playback "image" via the iDmss app doesn't play per frame by frame but the "Playback" works though. Have tried resetting all default and same results...have reverted back to the previous firmware and problem resolved ;).
 

legato

n3wb
Joined
Oct 25, 2019
Messages
7
Reaction score
6
Location
Netherlands
@EMPIRETECANDY , After upgrading my DHI-NVR4108-4KS2 to this firmware System Version:V4.001.0000000.1, Build Date: 2020-03-19, and defaulting the settings afterwards, I don't see buttons for fast-forward playback anymore.
Is this a bug, or is the fast-forward button replaced/changed/moved in the V4.x GUI? (coming from a firmware with GUI v3.x?)
 

Wael

Getting the hang of it
Joined
May 9, 2019
Messages
125
Reaction score
33
Location
California
Hello folks, I was hoping someone can solve a little mystery for me. I installed this new firmware and I was browsing the settings and new features. I came across a screen which had a bunch of check box selections for what I think were alert settings. At the top of the screen was a selection for something like "mobile alert" or "mobile application". Something like that. Anyhow, for the life of me I cannot seem to find it again. Does anyone know what I'm referring to that could maybe point me in the right direction? Thank you!!
 

awonson

Pulling my weight
Joined
Feb 7, 2020
Messages
146
Reaction score
147
Location
Australia
@Wael , go to Security, then System Service, on the Basic Service tab I believe is the option you are looking for.
 

Wael

Getting the hang of it
Joined
May 9, 2019
Messages
125
Reaction score
33
Location
California
@awonson, you are awesome my friend!! That is exactly it. I must have searched for an hour or so. Thank you!!!
 

zape

Getting the hang of it
Joined
Sep 21, 2017
Messages
221
Reaction score
69
Some other dahua dealear website.
Probably does a better job than Andy updating their customers
 

awonson

Pulling my weight
Joined
Feb 7, 2020
Messages
146
Reaction score
147
Location
Australia
@zape, Any ideas of what changes / bugs this new version addresses? Did you get a changelog? Thanks!
 

zape

Getting the hang of it
Joined
Sep 21, 2017
Messages
221
Reaction score
69
No they didn't publish the changelog
 

awonson

Pulling my weight
Joined
Feb 7, 2020
Messages
146
Reaction score
147
Location
Australia
Thanks for the response @zape. I installed the update on my NVR4108-P-4KS2, and it is working well.
 

awonson

Pulling my weight
Joined
Feb 7, 2020
Messages
146
Reaction score
147
Location
Australia
@random101, I don’t have that problem - I can select the channels. Have you tried rebooting the NVR? Maybe default it if you haven’t already done so after the firmware update.
 

random101

Getting the hang of it
Joined
May 23, 2020
Messages
88
Reaction score
45
Location
Aus
I only have one channel atm - but I have to push refresh and it’ll let me select the preset channel below. And then whether it’s the face, trip wire ect. Having said that I’ve set some ivs intrusion things. But they don’t seem to activate. I’m not sure if it’s because it doesn’t have the channel selected.

I might try a reboot
 

awonson

Pulling my weight
Joined
Feb 7, 2020
Messages
146
Reaction score
147
Location
Australia
Are you setting the IVS in the camera's interface as opposed to the NVR? I have my five cameras connected to a Dahua PoE switch so I go into each camera's web interface and set up the IVS rules (Tripwire, Intrusion) along with the SMTP email options. I only set the recording schedule in the NVR. The IVS rules are then passed to my NVR.
 

random101

Getting the hang of it
Joined
May 23, 2020
Messages
88
Reaction score
45
Location
Aus
Are you setting the IVS in the camera's interface as opposed to the NVR? I have my five cameras connected to a Dahua PoE switch so I go into each camera's web interface and set up the IVS rules (Tripwire, Intrusion) along with the SMTP email options. I only set the recording schedule in the NVR. The IVS rules are then passed to my NVR.
No I was trying to do it through the nvr web interface.
Can you let me know how to set it through the camera?
 

awonson

Pulling my weight
Joined
Feb 7, 2020
Messages
146
Reaction score
147
Location
Australia
@random101, How are your cameras connected? To a PoE switch or the NVR PoE ports at the back of the NVR? If they are connected to a PoE switch, open a web browser and type in the IP address of the camera. If connected to your NVR, you have to log into the NVR Via its web interface (go to its IP address in your browser) , go to the Camera Settings then Camera List, and click the blue Internet Explorer symbol next to the camera you want. If it is shown in the NVR as port 1, 2, 3, then I believe they are connected to your NVR. if you see port 37777, then they are possibly connected via a PoE switch as mine are. Once you are in your camera web interface, click on Settings. On the left click on Event. Click on Smart Plan and click the icon to turn it on. Click Save. Then Click IVS on the left menu and then add your rule type - intrusion or tripwire - by clicking the green plus sign. Draw out your rule on the image and save it. When I log into my NVR, I see the rule has been picked up and displayed for my channels. That is how I do it for my five cameras.
 
Top