Menu
What's new

Mini PTZ V2 PTZ controls inverted after FW upgrade

C

caeks

n3wb
Joined
Jan 24, 2016
Messages
5
Reaction score
0
Location
AUS
Hey Guys

I have a mini PTZ V2 with S2l chip currently running IPNC_S2l2.0.1_build201606201315 firmware
Out of the box everything worked fine however since upgrading the firmware all the PTZ controls are inverted. As far as I can tell everything else still works fine. I have tried all other firmware versions that I can find on these forums with no luck.

Has anyone else had any similar problems?

Thanks
 
alastairstevenson

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,952
Reaction score
6,786
Location
Scotland
I believe that's the version that introduced that bug. @klasipca commented on it in one of his threads.
I've not yet seen any newer firmware posted.
 
Last edited by a moderator:
C

caeks

n3wb
Joined
Jan 24, 2016
Messages
5
Reaction score
0
Location
AUS
alastairstevenson said:
I believe that's the version that introduced that bug. @klasipca commented on it in one of his threads.
I've not yet seen any newer firmware posted.
Click to expand...
Ahh okay, so it is a known issue, If that was the version that introduced it, shouldent rolling back fix it?

vasycara said:
You have IPNC_S2l2.0.1_build201606201315
and here is IPNC S2l2.0.1_build201607221508
Click to expand...

Sorry, Yeah I am currently running 201606201315 but have tried IPNC S2l2.0.1_build201607221508 previously with no luck.
 
C

caeks

n3wb
Joined
Jan 24, 2016
Messages
5
Reaction score
0
Location
AUS
vasycara

vasycara

Getting the hang of it
Joined
Jun 22, 2015
Messages
227
Reaction score
48
caeks said:
Thanks, but I have tried all the versions in that thread. Even the older versions seem to have a same problem :/ Have tried upgrading via web interface and the batch control program.
Click to expand...
I have a mini PTZ V2 with S2L chip and works well with all these firmware.
 
T

tn6478

Young grasshopper
Joined
Aug 5, 2015
Messages
38
Reaction score
4
I am running a new firmware camera work greats. Asking jack to send me the firmware

Sent from my SM-G930T using Tapatalk
 
T

tn6478

Young grasshopper
Joined
Aug 5, 2015
Messages
38
Reaction score
4
Currently running PTZ V2 Model 7
Program Version V2.0.1 Build 201608091810S
Control Version MiniPtz_V2.0.1_build201607291544
Web Page Version 1.1.1 Build 20160809
Plugin Version 2.0.1.45

Sent from my SM-G930T using Tapatalk
 
M

Michael-42

n3wb
Joined
Oct 23, 2016
Messages
2
Reaction score
0
I have the same problem, that after updating the firmware the PTZ-Control is reversed in the directions.

Model
Serial No.10D19B57138EB362B3
Program VersionV2.0.1 Build 201607221508S
Control Version MiniPtz_V1.0.2_build201607111019
Web Page Version1.1.1 Build 20160303
Plugin Version1.0.4.43

Could anyone help me, i have tried several versions, but i couldn´t fix the problem. everything elso is working correct on the camera.
 
M

Michael-42

n3wb
Joined
Oct 23, 2016
Messages
2
Reaction score
0
The problem stay with the reverse PTZ directions. The zoom works, therefore i didn´t make the Kernel update, correct ?

Model
Serial No.10D19B57138EB362B3
Program VersionV2.0.1 Build 20161012152123S
Control Version MiniPtz_V1.0.2_build201607111019
Web Page Version1.1.1 Build 20160303
Plugin Version1.0.4.43
 
gamer4life

gamer4life

Young grasshopper
Joined
Feb 25, 2015
Messages
42
Reaction score
13
DavidReam said:
Has anyone resolved the inverted control issue yet? I'm working with my vendor I purchased the camera from, but being it's China and a 14 hour difference it's hard to get timely answers. On a side note, I first contacted the seller due to the camera constantly rebooting during the day and night. So they sent me a new firmware file once i found out what chipset i had. So i followed their instructions and flash the firmware file and then a kernel file and from there on the past several days the camera ptz controls are inverted. Before contacting the vendor I purchase a poe splitter cable to change from poe to using the external 12v cord on camera. Still have the rebooting issues afterwards. Any thoughts or suggestions would be appreciated.
Click to expand...

vendor resolved
 
gamer4life

gamer4life

Young grasshopper
Joined
Feb 25, 2015
Messages
42
Reaction score
13
alastairstevenson said:
With the updated firmware?
Would you care to share?
Click to expand...
I don't believe they supplied me with new firmware, but maybe a script file to correct the controls. PM me your email address and I will send the files they sent me tonight when I get home
 
You must log in or register to reply here.
Top