Need help add axis cams to smart pss

[Hackedup]

I have smart pss on win 10 NVR . When I try to add the cams to pss I keeping getting can not find network host. I have my cams set to DHCP . I also have ONVIF setup as well

model P3344 and P3346

 

[fenderman]

I have smart pss on win 10 NVR . When I try to add the cams to pss I keeping getting can not find network host. I have my cams set to DHCP . I also have ONVIF setup as well

model P3344 and P3346

pss will only support dahua or dahua oem cameras.
the only way to get them to work on pss is to first connect them to a dahua nvr and then stream to pss.

 

[tangent]

Free VMS Software Directory

 

[Hackedup]

pss will only support dahua or dahua oem cameras.
the only way to get them to work on pss is to first connect them to a dahua nvr and then stream to pss.

Thanks a lot. if these cams don't look good in low light I'm just going with dahua

 

[fenderman]

Thanks a lot. if these cams don't look good in low light I'm just going with dahua

These are 9 year old cams with small sensors, they will not perform well by modern standards.