pmcross
Pulling my weight
Hi All,
I have a 3 Mp Amcrest camera that I need some advise on improving night vision on. I currently run BI and Sighthound for 10 cameras. I have been able to optimize night vision on my other cams by turning 3D NR down to 33% from 50% for the night profile. This however didn’t improve the camera that I’m needing advice on. I also set the camera to shutter prority with a range of 0 to 16.66. I found these tips on this forum, which has been a huge help configuring my cameras, BI, etc. My camera is mounted on a post about 10 feet high. I also have an external IR light mounted next to it about 1 foot above it. There is also a dusk to dawn light mounted about 6 feet above the camera. During the day I can easily identify a person, but at night it is extremely blurry. Any advice is appreciated. I’ve attached my camera settings as well as link to a video excerpt from BI.
iCloud
I have a 3 Mp Amcrest camera that I need some advise on improving night vision on. I currently run BI and Sighthound for 10 cameras. I have been able to optimize night vision on my other cams by turning 3D NR down to 33% from 50% for the night profile. This however didn’t improve the camera that I’m needing advice on. I also set the camera to shutter prority with a range of 0 to 16.66. I found these tips on this forum, which has been a huge help configuring my cameras, BI, etc. My camera is mounted on a post about 10 feet high. I also have an external IR light mounted next to it about 1 foot above it. There is also a dusk to dawn light mounted about 6 feet above the camera. During the day I can easily identify a person, but at night it is extremely blurry. Any advice is appreciated. I’ve attached my camera settings as well as link to a video excerpt from BI.
iCloud