Need Help Revotech Pinhole IP-Camera Firmware

Joined
Aug 5, 2021
Messages
4
Reaction score
0
Location
Germany
Hello everyone,

I don't know if this is the right forum. If not, please move it.

I bought a Revotech used IP camera on eBay. I already have the same model .

Is there a way to upload the original firmware again?
With TFTP program?
Or a compatible (open source, freeware)?
Where can I find these? -> V2.2.6071-20190903 14:53:08
Product: H6EV200-S-30-L 0S77
Revotech IPIR-P-1080P or IPIR-16EV2
Chip: Hi3516 CRBCV100 CP51K1622 1622-China

Can someone help me please?

Thanks.

CU Martin


Hallo an Alle,

ich weiß nicht ob das hier das richtige Forum ist.Wenn nicht bitte verschieben.

Ich habe eine Revotech IP Kamera gebraucht auf Ebay gekauft.Das gleiche Modell habe ich schon.OK.Jetzt habe ich mich auf der Kamera Seite eingeloggt und siehe da,ein ganz anderes Layout.Warscheinlich hat der Vorbesitzer eine andere Firmware draufgespielt und kamm nicht mehr zurecht.

Gibt es eine Möglichkeit die Original Firmware wieder uploaden ?
Mit TFTP Programm ?
Oder eine kompatible(OpenSource,Freeware) ?
Wo finde ich diese ? -> V2.2.6071-20190903 14:53:08
Produkt: H6EV200-S-30-L 0S77
Revotech IPIR -P-1080P oder IPIR-16EV2
Chip: Hi3516 CRBCV100 CP51K1622 1622-China

Kann mir bitte jemand helfen?

Danke.

CU-Martin
 

Attachments

Joined
Aug 5, 2021
Messages
4
Reaction score
0
Location
Germany
I discovered another Winbond 25q64jvsq on the board. Is the firmware in there?
Ich habe noch einen Winbond 25q64jvsq auf der Platine entdeckt.Ist da etwa die Firmware drin ?
 

markb56710

n3wb
Joined
Jan 10, 2024
Messages
1
Reaction score
0
Location
Uk
Hi Martin, I have run into a problem with the same device I believe, although I can view the stream I need to get back into the admin configuration but unable to do so due to IP Limit (guessing the password has been guessed too many times) I have no idea how to reset it and struggling to find out any information. Ideally some sort of reset button would have been good, but I haven't found any way of doing it.

I wondered if you have found out anything since your last post?
 
Top