Network Node Construction Complete

Mike K

Getting the hang of it
Joined
Mar 13, 2016
Messages
381
Reaction score
40
Location
Howell, Michigan
This is the part of my overall system witch is located in my marketing building.
Now complete, I hope.

The rack frame is lagged to the wall frame, and the depth is adjustable. Both sides have hinges so the Individual devices can swing out from either side. This assembly contains the following:

Modem - Netgear Cm500
Secondary Switch - Netgear ProSafe GS510TP
Keystone Patch panel -
PDU (w/surge protection) - CyberPower CPS-1215RMS

I also put ventilated shelves on the top and bottom to capture excess cable and power cords. This assemble is a system node that interfaces 3 cameras, one WiFi access point, the cable (Comcast) connection, and the fiber, (OM4), trunk line connection to my primary switch in another building. The yellow and red cables hanging from the patch panel are charge cords.


upload_2017-3-27_18-19-44.jpeg
 
Last edited:
As an eBay Associate IPCamTalk earns from qualifying purchases.
As an Amazon Associate IPCamTalk earns from qualifying purchases.

larry1302

n3wb
Joined
May 10, 2015
Messages
12
Reaction score
12
That is way to neat! Where's the bird's nest. What fun will tracing cables be in that setup?

Bottom line, VERY NICE!
 

Mike K

Getting the hang of it
Joined
Mar 13, 2016
Messages
381
Reaction score
40
Location
Howell, Michigan
As an Amazon Associate IPCamTalk earns from qualifying purchases.
Top