New cams at our command center

bababouy

Known around here
Joined
Mar 29, 2015
Messages
1,053
Reaction score
1,630
Location
almost to the bottom
We recently moved our command center to a new location. This means installing some new cams and access control for the doors. We ran cat6 everywhere and we will end up with several NVRs and several different areas with displays. We are using Dahua n24cg52 starlight turrets, which are the ePoE replacements for the n24bg52. We decided to use the mounts with these and drill smaller holes in the tilt-wall.

20190122_113936.jpg 20190122_113941.jpg 20190123_144717.jpg 20190123_144722.jpg
 

bababouy

Known around here
Joined
Mar 29, 2015
Messages
1,053
Reaction score
1,630
Location
almost to the bottom
These two will probably stay in color all of the time also. Thanks for the advice though. I am always open to new ideas.
 

bababouy

Known around here
Joined
Mar 29, 2015
Messages
1,053
Reaction score
1,630
Location
almost to the bottom
Drywall screws outdoors ? Please tell me that's not what i'm seeing .
Correct - We like to use drywall screws in tilt-wall down here in South Florida because they are outdoor rated and will hold in cat 5 hurricane force winds. We also use drywall screws to hold on our hurricane shutters and for anchoring into CBS. :winktongue::winktongue:
 

awsum140

Known around here
Joined
Nov 14, 2017
Messages
1,254
Reaction score
1,128
Location
Southern NJ
Use deck screws, not drywall screws. They don't rust, anywhere nearly as fast, so they can be removed without using a hacksaw after the head twists off.
 
Top