No network since NVR fallen down from 3Meter down

normel

Getting the hang of it
Joined
Dec 1, 2014
Messages
288
Reaction score
22
Today i have managed to Drop a chinese 7608n-e2 NVR ceilling to the ground ( while the case is closed ) After booting up, everything went normal, but SADP tool can not see the device anymore. TX/RX led on the front panel is blinking ( not so often ) and i also see the led on the router . So the cable is seen. But as the device is set to DHCP, its not getting any ip adres, also cannot ping when setting static one20160208_014329.jpg20160208_014537.jpg20160208_014545.jpg

The cables, which are connecting the mainboard with the front panel, are connected good. and no parts are missing. What could be wrong?
I am sure the router , cable etc are OK. Before the accident the nvr was working good.
 

normel

Getting the hang of it
Joined
Dec 1, 2014
Messages
288
Reaction score
22
the cable is OK. Alreasy tried another.
 
Joined
Dec 22, 2015
Messages
2
Reaction score
0
Well if it fell with the cable plugged in chances are the socket/solder joints are damaged
 
Top