I have another strange problem now, which i hope someone can help me with. So there are 4 camera's connected to the nvr ( by onvif protocol ) The substream in config of camera is set like below:
But somehow, when i check the resolution inside the NVR,its shows as the THIRD stream settings of camera, it shows me as below:
And im not able to set it as in the camera configuration, which makes everything jump ( 1fps )
WHen i set protocol to Hikvision it works ok, but then the Aiming Schedule of the motion detection and smart settings inside camera is getting reset:sad::sad:
see: https://www.ipcamtalk.com/showthread.php/1306-Hikvision-Motion-Detection-Event-Settings-Getting-Reset
So im really out of idea. Any help welcome
But somehow, when i check the resolution inside the NVR,its shows as the THIRD stream settings of camera, it shows me as below:
And im not able to set it as in the camera configuration, which makes everything jump ( 1fps )
WHen i set protocol to Hikvision it works ok, but then the Aiming Schedule of the motion detection and smart settings inside camera is getting reset:sad::sad:
see: https://www.ipcamtalk.com/showthread.php/1306-Hikvision-Motion-Detection-Event-Settings-Getting-Reset
So im really out of idea. Any help welcome
Of yourse you have to change back the protocol to "hikvision" instead of "onvif"