Only two of my 14 cameras show when connected to the server

[rdm]

Hello everyone. This is my first post.

I'm using Hikvision DS-2CD2132F cameras. I have Blue iris Ver 4.2.1.0 64bit running on a windows 8.1 machine with an i7 quad core and 16Gb of Ram. It runs at 28-32% CPU.
On the Win8.1 side all is great showing video and controlling all aspects of recording, alerts to sms and email etc...

When I use IP Cam Viewer Pro App on my iPhone 6S all cameras are visible.

When I connect over LAN or WAN with the Blue Iris IOS app on my phone only two cameras show video.

The cameras that are not showing video have fps of 19.96 showing in the line next to where the video should be.

I have tried forgetting the server and redoing it all on both the Windows side and the ios side to no avail.
Cannot get all of the cameras to show video on the app side.

Any ideas out there?

Thanks in advance.

 

[fenderman]

@rdm, the app will display all your cameras...it simply need to be setup properly. First thing to is camera properties>webcast the web/mobile streaming should be enabled for all cams.

 

[rdm]

Thanks so much fenderman! For the quick reply and for the solution to my issue.
I came back home and looked and sure enough, some how that one setting was different on 12 of my cameras.
They all work in the app now.
Thanks again.
Do you happen to play a Fender Strat?

 

[fenderman]

Thanks so much fenderman! For the quick reply and for the solution to my issue.
I came back home and looked and sure enough, some how that one setting was different on 12 of my cameras.
They all work in the app now.
Thanks again.
Do you happen to play a Fender Strat?

Glad its working! and yes i do.