OpenALPR and Dahua camera Stream Settings

usaf_pride

Pulling my weight
Joined
Mar 10, 2017
Messages
284
Reaction score
170
I'm playing with my standard 5231 and it reads the mainstream just fine (H.265) at FPS/Iframe at 30, bitrate at 2048 @ 1920x1080. Wondering if I should be using a different settings via substream 1 (H.264) or 2 (mjpg)?

Thanks
 
Joined
Nov 25, 2016
Messages
839
Reaction score
2,280
If your OpenALPR agent says that it is keeping up with 30 FPS at that resolution, there's no need to use a lower resolution substream. What computer are you using to run the agent? And are you using an NVIDIA graphics card to handle the video processing?
 

usaf_pride

Pulling my weight
Joined
Mar 10, 2017
Messages
284
Reaction score
170
If your OpenALPR agent says that it is keeping up with 30 FPS at that resolution, there's no need to use a lower resolution substream. What computer are you using to run the agent? And are you using an NVIDIA graphics card to handle the video processing?
Sorry for delay. Traveling for work across a lot of time zones. I first set it up on an OrangePi, but that had never been stable in its life, so I switched to a rPi 3 B+. Which ran hot and taxed the processors, but it worked.

That being said, I never checked the Agent.
 
Top