Panasonic WV-NS202A PTZ not working after version 4.2.3.1 x64 update

godfree1963

BIT Beta Team
Joined
Apr 29, 2014
Messages
49
Reaction score
22
Location
Staines-upon-Thames
I updated Blue Iris to 4.2.3.1 x64 today and my Panasonic WV-NS202A PTZ camera would not work with the PTZ controls in Blue Iris. :-(

I tested the camera and the PTZ controls worked fine in the Panasonic web page, so it wasn't the camera. :)

I traced the problem down to Blue Iris setting the camera to use "https (JPEG cameras only!)" in the Network IP Camera configuration menu, I reset it back to http and the PTZ controls worked fine again. I checked my other cameras and 3 of 11 had been set to "https (JPEG cameras only!)". They were all set to http before the update.

Was it just me or has anyone else had this problem?
 
Top