play back recording started to lag

abilesh

n3wb
Joined
Feb 5, 2018
Messages
2
Reaction score
0
hi, recently i installed 100 hik vison Ip cam along with 3 hik vision NVR and 8 TP link 16 port switchers. my ip range given from 192.168.1.100 - 19.168.1.210. along this network 20 computers also been connected to this same network with the ip range of 192.168.1.220 on words. the entire network running perfect until the owner added some extra computers. from that day on the play back recording started to lag, data bandwidth is lower than before and some time the router wont work until we do a reset and update the settings again. what can i do for this?

(sorry for my bad English)
 

0blar

Getting the hang of it
Joined
May 17, 2017
Messages
281
Reaction score
34
Are your switch Gb ?
What about your cable ? Cat 6 ?
Tell us more about your architecture
 

abilesh

n3wb
Joined
Feb 5, 2018
Messages
2
Reaction score
0
Are your switch Gb ?
What about your cable ? Cat 6 ?
Tell us more about your architecture
I have used GB switchers and cat 6 cables for all network.

  1. Number of ip cams - 100.
  2. 8 tp link switchers - 16 port
  3. Hik vision NVR - 3
  4. Dlink router - 1 access point
  5. Dlink router - 1 for internet access
  6. 2 tp link switch - 8 port

I have chosen 16 port switch becaus of 32 port are expensive than buying 2 16 port switches.

In ground floor 5 switchers has been installed.

2nd floor 3 switchers has been installed.

Every switch connected 15 ip cams.

Additional two 8 port switchers for computers and weight scales.
 
Top