Please help,DS-2cd2035-i <Chinese to English >

[Kolla Lim]

I bought a HikVision Cams DS-2cd2035-I from Taobao.com with firmware V5.3.3_150803 <Chinese>. So what I have to do to change to English or multi lang?

thank you for advance.

 

[Del Boy]

That's the problem with ordering Taobao.com rather than Aliexpress is that the seller hasn't put multi-language hacked firmware on it.

 

[spixel]

That's the problem with ordering Taobao.com rather than Aliexpress is that the seller hasn't put multi-language hacked firmware on it.

There's multi language cameras on taobao too. This cost me $53 there




OP's best bet is to message a seller on aliexpress pretending to have bought a camera from them on a different account and ask for the firmware.

 

[Del Boy]

And then post it on here to help others!

 

[Kolla Lim]

ok. I will ask the seller first. then if I get ML firmware i will post on here to help others again.

 

[Giay Dep Khiem]

i need it....

 

[alder]

Why there is no firmware on the this camera?

Releases are available but no downloads ?

 

[Enabler]

There is but they are Chinese.

Sellers won't give out the firmware - they know it will be put on Internet sites

 

[alder]

There is but they are Chinese.

Sellers won't give out the firmware - they know it will be put on Internet sites

[FONT=&quot] для этой модели[/FONT] у[FONT=&quot]же давно вышли прошивки релиз 5.3.3 и релиз[/FONT][FONT=&quot] 5.3.6
[/FONT]http://www.hikvision.msk.ru/forum/26-3407-21975-16-1460469658
[FONT=&quot]

[/FONT]

 

[whoslooking]

Above translated,
this model has long been out firmware release 5.3.3 and release 5.3.6

THIS IS AN ENGLISH ONLY FORUM, If you post in Russian
Translate it to English too.

 

[CodeGreen]

Above translated,
this model has long been out firmware release 5.3.3 and release 5.3.6

THIS IS AN ENGLISH ONLY FORUM, If you post in Russian
Translate it to English too.

and the site basically says Chinese only for 2035...

 

[b166erobot]

I have DS-2CD2035-I firmware 5.4.0 multilanguage but not work with my nas synology. :sad2:

 

[alder]

I have DS-2CD2035-I firmware 5.4.0 multilanguage but not work with my nas synology. :sad2:

Wow, can not be. Nowhere is this camera firmware.
I would be very grateful if you share firmware for this device.


1. your nas sinologist does not support the protocol of this camera, try to change resolution ([FONT=&quot]2048x1536[/FONT] ->[FONT=&quot]1920x1080P)[/FONT] in to 2CD2035.
2. make sure that the set one video format H 264 (cd2035 - may be set H 265 or H264+ ).
3. it should be on the camera to change the password to a password set on nas synology.

 

[b166erobot]

the cam is connected to nas in cifs. I create quota of 200GB but cam view 1.8TB.

 

[Enabler]

Wow, can not be. Nowhere is this camera firmware.

5.4.0 is on my latest 2xx5/3xx5 camera from aliexpress so can be

 

[Buggah]

the cam is connected to nas in cifs. I create quota of 200GB but cam view 1.8TB.

got the same problem with 5.3.8 on a ds-2cd3145f-is

 

[b166erobot]

got the same problem with 5.3.8 on a ds-2cd3145f-is

How you solved

 

[Buggah]

it's not solved.

 

[Buggah]

I found a quick and dirty solution.

- I stuck a dedicated disk in a Windows 7 machine.
- Created a directory. Shared it
- Created a directory in the first directory. Shared it
- Make the cam write to ip adres /directory2. SMB/CIFS with adminstrator and password.

New problem now; I'm unable to play the H265 files I download from the webinterface

 

[b166erobot]

I have NAS to work 24/7 not windows