Poe Switch GS1900-8HP

[Great]

I just bought a GS1900-8HP switch and connected cameras to it, first i connected 2 of these http://s.click.aliexpress.com/e/q7saXxw

and after that 2 of these http://www.aliexpress.com/item/Freeshipping-POE-IP-Camera-HD-CCTV-Camera-Security-Network-Cam-Mini-Dome-720P-1080P-1MP-2MP/32461563302.html

when i connected the second domecamera, the camera started to blink and didnt get power enough.

when i look in the power consumption in the switch i see that the 2 first consumes about 4,5w but maximum power is 16w, and the 3 dome camera also consumes 4w but has a maximum power of 32w, so the switch allocates almost 64W, leaving 6w left.

can i do anything about this or is it just to buy a second switch and face the fact that it is like that, seems ridicoulus when the cameras 3 cameras consumes 12w , but the switch allocates 64w.

 

[fenderman]

@Great. You need to set the switch to consumption mode NOT classification mode.
Side note, dont waste money on cheap no name cameras. They will only cause you grief.

 

[pal251]

I did the same thing with that switch. I have the 24 port one...

 

[Great]

Thank you for answer, now it works great.

Skickat från min E5823 via Tapatalk