Possible to use TrendNet TV-VS1 analog to IP converter?

[MIPS64]

I have 4 outdoor Panasonic WV-CW374 cameras that I have converted to IP using the TrendNet TV-VS1 converter. Picture shows up fine on the converter end but I was hoping to get Blue Iris to record the footage. There is no driver for the converter in Blue Iris that I can tell. I have tried all the Panasonic drivers. Some of them simply give "No Signal" errors, while some actually state Check Port/User/Password, or RTSP: 404 File Not Found or incorrect format.

Thanks for any help!

 

[fenderman]

Welcome to the forum..You need to try the trendnet cams on the list not the panasonics...the trendnet devices are the one sending the stream...make sure you enter the correct ipaddress, and credentials...
EDIT: try this first rtsp://(IP address of the device)/h264
that is what the trendnet manual says

 

[MIPS64]

Oh, thanks, the TrendNet driver worked!

 

[fenderman]

Great, make sure you are using the h.264 stream not one of the mpeg streams...