quick question about changing the router

Discussion in 'Hikvision' started by Spirch, Dec 7, 2018 at 10:14 PM.

Share This Page

  1. Spirch

    Spirch n3wb

    Joined:
    Friday
    Messages:
    6
    Likes Received:
    0
    Location:
    Canada
    I just got a DS-2DE3304W-DE using a trendnet tpe-115gi for the poe

    initial setup is
    (1) modem (from ISP) ->
    (2) router (microtik hAP AC) ->
    (3) router (microtik cAP AC) ->
    (4) poe ->
    (5) camera

    everything seem to work fine, everything is using cable, I activated it and I can see the video with rtsp (vlc) or iVMS

    if i change (3) for another router (microtik RB951G-2HnD) with a wireless client between (2) and (3) instead of cable the camera keep cycling the link up and down every few seconds and I can't connect to it

    (2) is the dhcp server

    quick note; ip address is the same and when I change (3) the ip is assigned properly so the camera is doing a dhcp request

    is there any specific thing that need to be done?
     
  2. Spirch

    Spirch n3wb

    Joined:
    Friday
    Messages:
    6
    Likes Received:
    0
    Location:
    Canada
    it playing around with configuration on the RB951G-2HnD and somehow now it work