Surprise, I logged in with my phone and typed the string in.You could probably add it exactly as if it was a Dahua (as in the screenshot in the sub stream guide).
@Old Timer The only typo I see is "unvif" where it should say "onvif"
Do it exactly as described in the Sub Stream Guide for a Dahua camera. Keep the main stream configured.So if I understand you correctly just copy the mainstream /cam/realmonitor?channel=1&subtype-0&unicast=true&proto=unvif into the substream? Do I leave the mainstream string there too or delete it?
I made a typo there, here it is fixedSo if I understand you correctly just copy the mainstream /cam/realmonitor?channel=1&subtype-0&unicast=true&proto=unvif into the substream? Do I leave the mainstream string there too or delete it?
I left the main substream as is and copied the substring from the Dahua as posted Wiki as instructed to no avail. I says - RSTP: 404 Not Found.Do it exactly as described in the Sub Stream Guide for a Dahua camera. Keep the main stream configured.
(Amcrest cameras are mostly/all made by Dahua)
Did you use my corrected string? This is what I am using on my IP8M-2496
biggen,Did you enable a substream on the camera itself?