sunba 507-20xc won''t connect
- Thread starter BobW55
- Start date
fenderman
Staff member
- Joined
- Mar 9, 2014
- Messages
- 36,901
- Reaction score
- 21,269
set it to rtsp h.264 (at the top of the stream)
and enter this as the path, you can also try the empire and anran streams
/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp
There is no space in .sdp not sure why its displaying like that.
BobW55
Getting the hang of it
- Joined
- Apr 8, 2015
- Messages
- 163
- Reaction score
- 46
Hey thanks that worked.....Kinda..
If I select any camera that uses port 34567 I get video now. But the PTZ controls are frozen. Camera starts to move then snaps back to home.
it will let me select a preset that I had used with the CMS software, but then camera goes right back to home.
If I select any camera that uses port 34567 I get video now. But the PTZ controls are frozen. Camera starts to move then snaps back to home.
it will let me select a preset that I had used with the CMS software, but then camera goes right back to home.
fenderman
Staff member
- Joined
- Mar 9, 2014
- Messages
- 36,901
- Reaction score
- 21,269
read the help file under ptz...some cameras require you to enter the ptz name not just a number...or change the preset numbers to begin at a higher value.
BobW55
Getting the hang of it
- Joined
- Apr 8, 2015
- Messages
- 163
- Reaction score
- 46
Went back to the CMS software that came with the camera and reset everything to default.
Went back to Blue Iris and now PTZ works. Now to read how to "SET" the preset positions.
I do have a question about the "External script" Are these CGI commands that can be sent?
I want to set up about 6 presets, and snap a still image at each one.
Thank you for your help
Went back to Blue Iris and now PTZ works. Now to read how to "SET" the preset positions.
I do have a question about the "External script" Are these CGI commands that can be sent?
I want to set up about 6 presets, and snap a still image at each one.
Thank you for your help
fenderman
Staff member
- Joined
- Mar 9, 2014
- Messages
- 36,901
- Reaction score
- 21,269
From the help file..
The External script option is for advanced use. You may specify any EXE or other executable file to run in response to a PTZ movement. The parameter sent to the script will be one of UP, DOWN, LEFT, RIGHT, ZOOMIN, ZOOMOUT, HOME, or PRESET followed by a comma and preset number.
The External script option is for advanced use. You may specify any EXE or other executable file to run in response to a PTZ movement. The parameter sent to the script will be one of UP, DOWN, LEFT, RIGHT, ZOOMIN, ZOOMOUT, HOME, or PRESET followed by a comma and preset number.
Hi!
Any one got the problem with rotating camera 507 x20?
Power on, then it will go 365 degrees and stops.
After a few seconds it will start turning around again and continues over and over again.
Navigates to a position and again after a few secons it will start turning.
Everything set to default, any ideas how to get the camera to stop turning??
Thanks!
Any one got the problem with rotating camera 507 x20?
Power on, then it will go 365 degrees and stops.
After a few seconds it will start turning around again and continues over and over again.
Navigates to a position and again after a few secons it will start turning.
Everything set to default, any ideas how to get the camera to stop turning??
Thanks!