Unable to hook up Amcreset IP8M-2493EB camera to my LaView 8-Channel 4K ONVIF H.265 PoE (LV-N9508Q8E)

[ramu1225]

Hi Folks,
I am trying to connect Amcreset IP8M-2493EB camera to my LaView 8-Channel 4K ONVIF H.265 PoE (LV-N9508Q8E) ,but With no luck , NVR is not detecting the camera , I have tried different protocols [ONVIF, Laview... etc] . I have tried SADP tools on my PC by hooking my PC to NVR directly . while the IP camera connected to NVR [ Ch 1 and Ch 2 respectively]. Can someone help me ? or have tried Amcrest IP camera to Laview NVR ?

 

[looney2ns]

Hi Folks,
I am trying to connect Amcreset IP8M-2493EB camera to my LaView 8-Channel 4K ONVIF H.265 PoE (LV-N9508Q8E) ,but With no luck , NVR is not detecting the camera , I have tried different protocols [ONVIF, Laview... etc] . I have tried SADP tools on my PC by hooking my PC to NVR directly . while the IP camera connected to NVR [ Ch 1 and Ch 2 respectively]. Can someone help me ? or have tried Amcrest IP camera to Laview NVR ?

Most likely you will need to manually add it.

 

[ramu1225]

When you say Manual , do I have to add the POE camera to my Router and my PC to router and run SADP tool on my PC , find the Camera get the IP, MAC, etc. and hook the NVR to Router and Add the CAmera in the configuration by editing ?

 

[looney2ns]

Yes, you will need to know what the IP, since it is a Dahua OEM, the ip address of the cam should be 192.168.1.108.
Change the IP of the camera to the same range that your NVR is using for the cameras.
Best way to do this is to use a web browser to log into the camera at 192.168.1.108, Change IP, Set password as the same as your NVR uses.
Connect cam to NVR, then you will most likely need to manually add it.
SADP tool won't find it, since it's not a Laview/Hik camera.