Upgrading DS-2CD2032-I China

[vinzi]

Hello!

I have this camera:

DS-2CD2032-I20140703CCCHXXXXXXXX

I think that is a chinese camera with modded firmware.

Now I would know which is the latest firmware that i can use and if there is a procedure...

I would use the camera on ezviz studio.

thanks

 

[alastairstevenson]

Any stock firmware of 5.3.0 and upward would result in a 'bricked' camera, as it is a Chinese model.

To update to the latest firmware (5.4.41) you would need to convert the camera to EN and update in stages.
The method to do that is here :
Unbrick and fully upgrade your R0 / DS-2CD2x32 IP cameras -
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

 

[vinzi]

Thanks for your reply...

now i have upgraded to firmware 5.4.0 because the 5.4.41 gets an error on stage 3.
I could upgrade to the firmware 5.4.41 from the utility batch configurator?

Is it possible to use this camera whit the ezviz/hikvision app to see outside from the home?

Thanks

 

[alastairstevenson]

now i have upgraded to firmware 5.4.0 because the 5.4.41 gets an error on stage 3.

Yes, in Stage 3 the 5.4.5 version works OK, but not 5.4.41
Well done for getting there!

I could upgrade to the firmware 5.4.41 from the utility batch configurator?

Yes, or the web GUI.
You need to get to either 5.4.5 or 5.4.41 (the 'official' fixed version) to eliminate the 'Hikvision backdoor' vulnerability.

Is it possible to use this camera whit the ezviz/hikvision app to see outside from the home?

Sorry - I don't know. I've never used any of these P2P apps, probably never will.