User and Pass correct but no image

Joined
Sep 8, 2018
Messages
1
Reaction score
0
Location
South
I am setting up a BI system with two cameras IP's xxx.xxx.xxx.108 and xxx.xxx.xxx.109 both have the same user name and passwords. I can independently view them on my web browser with no issue. for some reason BI will not show the xxx.xxx.xxx.108 camera. I have verified the IP, user and password several times but it just won't show. I even deleted and created a new camera from fresh with the sam results. The xxx.xxx.xxx.109 camera shows up just fine with the user & password. I tried other ports like 37777 but that didn't work either so I went back to port 80 as it was the same as used on camera xxx.xxx.xxx.109.

I get Error: 8000007a (Check Port/User/Password) 0

Any help would be appreciated.
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
What camera's? What error message do you get?
 

SouthernYankee

IPCT Contributor
Joined
Feb 15, 2018
Messages
5,170
Reaction score
5,320
Location
Houston Tx
Can you log into the camera from IE ?

What make and model camera?

Are both cameras on the same switch?

Did you make your own cables ?

Are you using g POE or a wall wart?

For internal IP address there is no need for the xxx.xxx.xxx .
 
Top