Varifocal Turret (IPC-HDW5231R-Z) not working right

[Bubs]

Just received from Andy

Does not seem to be working properly I want know if it is me or if I have a bad cam

It connects for a few minutes then drops very hard to log it to

 

[fenderman]

Just received from Andy

Does not seem to be working properly I want know if it is me or if I have a bad cam

It connects for a few minutes then drops very hard to log it to

probably you...provide more detail...how are you powering the camera

 

[Bubs]

poe currently connected with a short cat six cable 6 feet long as just try to set it up if I have plug in different camera in the same port and cable it works fine

Thanks for the help

 

[fenderman]

poe currently connected with a short cat six cable 6 feet long as just try to set it up if I have plug in different camera in the same port and cable it works fine

Thanks for the help

What poe source? did you make the cable is was it premade?

 

[Bubs]

Yes it's a premade cable it is a Poe switch Poe- SW800g

Af with a 130w max

 

[fenderman]

Yes it's a premade cable it is a Poe switch Poe- SW800g

Af with a 130w max

are there any other network devices connected? if so might be an ip conflict..

 

[Bubs]

Did a scan and set it to an on unoccupied IP address as it came with the default 108
So I changed it to 115

 

[fenderman]

Did a scan and set it to an on unoccupied IP address as it came with the default 108
So I changed it to 115

did you make any other changes?

 

[Bubs]

Just set it to my IP scheme and subnet

 

[Bubs]

Thank all of the help

Seem to be working be working now after run IP config tool again