HI dears
I have problem with dvr dahua xvr5104c-x1. After web firmware update, dvr keeps restarting. Only the dachua logo appear on the screen and restart.
I read the topic from the link below. Is he the solution for me?
ipcamtalk.com
I ordered the programmer and wonder where to connect with it. There is information in the manual that the programmer pins are in the rj45 connector. Can you confirm that for me? Should I search on the motherboard
Will this firmware be suitable for this recorder?
DH_XVR5x04-X1_MultiLang_NP_V4.000.0000002.11.R.190829.bin
Possibly could you give me another dvr repair manual?
I have problem with dvr dahua xvr5104c-x1. After web firmware update, dvr keeps restarting. Only the dachua logo appear on the screen and restart.
I read the topic from the link below. Is he the solution for me?
Dahua IPC unbricking / recovery over serial UART and TFTP
Easy recovery without serial: Dahua IPC EASY unbricking / recovery over TFTP Hello, I broke my camera by accident while messing with the firmware and had to recover it. Since I am not the only one that this has happened to and will probably not stay the last one: Here is a simple tutorial on...
I ordered the programmer and wonder where to connect with it. There is information in the manual that the programmer pins are in the rj45 connector. Can you confirm that for me? Should I search on the motherboard
Will this firmware be suitable for this recorder?
DH_XVR5x04-X1_MultiLang_NP_V4.000.0000002.11.R.190829.bin
Possibly could you give me another dvr repair manual?
