Yes, you are correct.Ok i try. But no unpack. Not working with this platform.
(c) 2009 ITE Tech. Corp. Mon Nov 5 11:13:06 2018
user@ubuntuvm:~/Desktop/Firmware$ sudo ./unpack.sh digicap.dav
Unpack DAV file
DavExtraTailOffset = 53587020 ; ExtraTailLen = 418070220 bytes
Firmware digicap.dav unpacked.
Unpack cramfs.img
fsck.cramfs: stat of cramfs.img failed: No such file or directory
./unpack.sh: 34: cd: can't cd to img
Decrypt file: start.sh
bad decrypt
140160163373504:error:0606508A:digital envelope routines:EVP_DecryptFinal_ex:data not multiple of block length:../crypto/evp/evp_enc.c:517:
DAV file was unpacked
Extract files from overseas.tar.lzma
tar (child): overseas.tar.lzma: Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
user@ubuntuvm:~/Desktop/Firmware$
These scripts (unpack.sh, repack.sh) support only Video intercom and Door bells devices. Please use hikpack tool for NVRs.Hi everybody. As you might know, Hikvision is going to change their firmware version to update the gui. It's apparently a major overhaul. (and so far it's pretty buggy) I was curious, how did you guys get the key for the decrypt? Flash dump? I ask because I think they have changed it..
Here is the firmware if you are curious: DOWNLOAD EU PORTALCode:user@ubuntuvm:~/Desktop/Firmware$ sudo ./unpack.sh digicap.dav Unpack DAV file DavExtraTailOffset = 53587020 ; ExtraTailLen = 418070220 bytes Firmware digicap.dav unpacked. Unpack cramfs.img fsck.cramfs: stat of cramfs.img failed: No such file or directory ./unpack.sh: 34: cd: can't cd to img Decrypt file: start.sh bad decrypt 140160163373504:error:0606508A:digital envelope routines:EVP_DecryptFinal_ex:data not multiple of block length:../crypto/evp/evp_enc.c:517: DAV file was unpacked Extract files from overseas.tar.lzma tar (child): overseas.tar.lzma: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now user@ubuntuvm:~/Desktop/Firmware$
Notice how long the davExtraTail is, is that odd? Also, you cannot do the ssh append real shell command instead of psh anymore. (at least remote, i didn't try serial) Also the root/hiklinux does not work remotely.
Thanks
Sure, but as @Ivan1985 says, the @montecrypto tool does multiple models : [MCR] Hikvision packer/unpacker for 5.3.x and newer firmwareBut support only one model....?
Very likely not - applying EN firmware to a CN camera will either be rejected, or the camera will be bricked.Is it safe to update this firmware and hopefully have English instead ? I just need it to work with my NVR.
You may have to enable ONVIF in the camera web GUI.Tried OVIF mode with NVR ,its cannot be detected.
That's a good result..I manage to use Onvif protocol to use the camera.
That should be an International model, you should be able to update using the EN/ML firmware from here : DOWNLOAD EU PORTALI updated my Hikvision DS-7716NI-E4
What happens when the NVR is powered on?Now it is not working anymore