Cameraguy
Known around here
- Feb 15, 2017
- 1,502
- 1,159
5.4.7 - May 25, 2021 - Support for DeepStack custom model files
- Thread starter fenderman
- Start date
beepsilver
Getting comfortable
Here's mine:
I have: faces,unknown, before nancy*...had to scroll over to display 'people,person'
I have: faces,unknown, before nancy*...had to scroll over to display 'people,person'
Last edited:
beepsilver
Getting comfortable
Cameraguy
Known around here
- Feb 15, 2017
- 1,502
- 1,159
beepsilver
Getting comfortable
Right, and I have no problems with accurate identification. According to the help file: By default, the motion-leading image and 2 additional images following the trigger are considered for object detection.
beepsilver
Getting comfortable
I tried openlogo, then played back a continuous video with test analysis on....all my burn boxes flashed on and off quickly. Removed openlogo from Deepstack\MyModels and playback with analysis returned to normal.
beepsilver
Getting comfortable
Not sure about the analysis delay, but during playback analysis, all models seem to be used regardless of whether or not you've enabled them during detection. If you only use 'dark' and 'openlogo' in your cam settings, people, not person will trigger the alert, but during playback analysis, you'll still get burn boxes for person and people.
I noticed this too. Saturday I sent an email to Ken with these proposals to help when we’re debugging DeepStack performance... (no response yet)
1. Would it be possible to make the 'Testing & Tuning > Analyze with DeepStack' option reflect the entries in the 'Custom models' box for the active profile?
2. And/or could the 'Testing & Tuning > Analyze with DeepStack' option display a popup with the same info as the &JSON macro for alerts?
I am having the same thing happen. Finally had a fedex truck go by, but it didn't logo ID it.
looney2ns
IPCT Contributor
beepsilver
Getting comfortable
Did the logo show up in analysis? (provided you have continuous recording on that cam)
Nope, logo did not show up. I am guessing there is some nuance issue that one of us will stumble across or a revision will kick it going.
I am going to take the dark model out now and see if just openlogo in custom picks up the evening ups truck.
beepsilver
Getting comfortable
You could do the same now with your current clip. Take out dark and run openlogo...the analysis should use all models available. My guess is you're right about the nuance issue...not likely to work just yet even in the absence of 'dark.'
Did you get openlogo to stop causing the flickering of burn boxes?
Cameraguy
Known around here
- Feb 15, 2017
- 1,502
- 1,159
When I review clips the burn boxes are fast blips. Is it the openlogo causing this?
beepsilver
Getting comfortable
Those were the symptoms I had when trying out openlogo....took it out of the mymodels folder and the issue stopped.
Cameraguy
Known around here
- Feb 15, 2017
- 1,502
- 1,159
Getting closer now LOL.
I took out the dark model and left just the openlogo.
It didn't pick up the UPS truck in live mode, but in playback and tuning I am getting the UPS and FedEx truck.
But I had to turn facial recognition off to get that far.
I am wondering now if it is a timing an issue and too many firing at once and one bogs down?
I am on an older machine, but the CPU isn't maxing out, but just trying to figure out what the issue may be.
I took out the dark model and left just the openlogo.
It didn't pick up the UPS truck in live mode, but in playback and tuning I am getting the UPS and FedEx truck.
But I had to turn facial recognition off to get that far.
I am wondering now if it is a timing an issue and too many firing at once and one bogs down?
I am on an older machine, but the CPU isn't maxing out, but just trying to figure out what the issue may be.
