friendly bump in hopes that someone else either IS or IS NOT seeing this. I'm speculating this might have something to do with the recent update to 5.0.6.0 x64. Do I have my auto-cycle settings correct for what I want?
To rehash:
I try to have the cameras cycle through only one group (for example, the two cameras that are in the "front patrol" group on my setup), it insists on cycling through all 9 of my cameras. I think it used to be that if I only wanted to cycle through the cameras in one group, then I would go to that group, expand to fullscreen and then select one of the two cameras.
What should we have checked here to see only the cameras in this single group?
To add, I just updated to 5.0.6.2 and still seeing the same behavior.
Another behavior I've noticed, not sure if it behaved this way before but if I'm set to a single group ("front patrol") and turn on the autocycle, go full screen then it will cycle through every camera I own. If I try to use the L< R> keys on the keyboard to hop forwards and backwards, then it will only go to the two cameras that I have in that group. Its like the autocycle is displaying everything but if you manually cycle, then it stays to the 2 cameras in that group.