I haven't run 5.3.2.11 since September. Could be a bug in that version? Because my clip lengths are fine.
Set according to your recommendations and still no dice. In UI3 I don't see any audio control at all. Downloaded the BI App and works fine there. I'll likely use it more anyway.
I don't have combine and cut set on any of the cameras. Also when I hover over the clip it will play the length of time that UI3 says and not the clip length. So if it says 1:10:10 it will play that 1 hour clip as you hover over the clip.Blue Iris does some funky things with clip lengths if you have combine & cut enabled. So that is probably all there is to it.
Check main menu > About this UI. This should tell you if the browser you are using doesn't support certain UI3 features.Set according to your recommendations and still no dice. In UI3 I don't see any audio control at all. Downloaded the BI App and works fine there. I'll likely use it more anyway.
Firewall or network configuration problem, probably.Yesterday I have updated BI, and now my UI3 is not connecting over Openvpn. What could be the problem?
I haven't seen that.Has anyone else noticed that Playback in UI3 is a little screwy in the latest version? For some reason when I pause the footage I'm playing back and then push play it restarts the file from the start instead of playing on from where I paused it. Also the play bar across the bottom does not move. Version 5.3.4.0 - Updated to 5.3.4.1 and the issue persists
Have you made any modifications to UI3's code, or added a local overrides script file?I just started using the UI3 on my iphone and ipads through chrome and safari, and also integrated into home assistant via an iframe. I can't figure out a pattern on which browser and iphone/ipad may be the cause of the problem, but I get the error shown in the attached picture in at least one browser on every device (but not the same browser on all devices).
The error is the same across all devices when a browser decides to not work. No amount of reloading or restarting helps. Any ideas? I would really like to use UI3 in home assistant via an iframe. Thanks!
update: on a couple of working UI3s, I changed from HTML5 to Java for H264 processing, and now those don’t work either.But I can’t change back to HTML5 because UI3 doesn’t finish loading - it stays in the h264 player loading phase. Where does UI3 store it’s config?
/ui3/reset.htm
.Thanks. I have not made any changes. I will try the reset path and start experimenting with things.Have you made any modifications to UI3's code, or added a local overrides script file?
UI3 keeps its configuration in Local Storage in your web browser. There is a reset button available if you load the path/ui3/reset.htm
.
I'm noticing similar behavior with BI 4.8.6.3 after upgrading to ui3 v128 from v60(?). Our BI version is older but the previous ui3 didn't do this,Has anyone else noticed that Playback in UI3 is a little screwy in the latest version? For some reason when I pause the footage I'm playing back and then push play it restarts the file from the start instead of playing on from where I paused it. Also the play bar across the bottom does not move. Version 5.3.4.0 - Updated to 5.3.4.1 and the issue persists
I forgot to add I'm using firefox. Behaviour doesn't appear in Chrome.I haven't seen that.