Main: rtsp://username:password@host:554/cam/realmonitor?channel=1&subtype=0
Substream #1: rtsp://username:password@host:554/cam/realmonitor?channel=1&subtype=1
Substream #2: rtsp://username:password@host:554/cam/realmonitor?channel=1&subtype=2
Snapshot: http://username:password@host/cgi-bin/snapshot.cgi
Nayr, does that snapshot URL work for you with the latest firmware update?works perfectly fine in VLCCode:Main: rtsp://username:password@host:554/cam/realmonitor?channel=1&subtype=0 Substream #1: rtsp://username:password@host:554/cam/realmonitor?channel=1&subtype=1 Substream #2: rtsp://username:password@host:554/cam/realmonitor?channel=1&subtype=2 Snapshot: http://username:password@host/cgi-bin/snapshot.cgi
I dropped mine as well and spent about 10 minutes looking for it. It was about 10pm and somewhere in a mulch bed. Luckily I found it. Thought about using a magnet but I'm not sure if it's stainless steel or not? I also regret only ordering one of these cameras.Anyone know the size (and a source of) the set screw used for this camera? I, of course, dropped one - never to be seen again.
Me too, I'd like to order 3-5 as soon as Andy gets more lol.I dropped mine as well and spent about 10 minutes looking for it. It was about 10pm and somewhere in a mulch bed. Luckily I found it. Thought about using a magnet but I'm not sure if it's stainless steel or not? I also regret only ordering one of these cameras.
I dropped mine as well and spent about 10 minutes looking for it. It was about 10pm and somewhere in a mulch bed. Luckily I found it. Thought about using a magnet but I'm not sure if it's stainless steel or not? I also regret only ordering one of these cameras.
For any other clumsy folks out there:Anyone know the size (and a source of) the set screw used for this camera? I, of course, dropped one - never to be seen again.
Interesting I'd have expected metric.For any other clumsy folks out there:
1. It's stainless (a magnet won't help)
2. The size is #10-32 x 3/8"
3. A 2-pack was $0.90 at my local Home Depot
Yes. Gotta be sure . Quite possible to also mistake "this fits tight and gets stuck" for "fits tight and right". Someone should take out one of the original screws and try it in those screw templates at HD/Lowes etc.Interesting I'd have expected metric.