What is wrong with you? First you say you had no major problems and then you say you have to replace two main boards and one is completely dead? How are those not major problems... Three of your five cameras failed completely....wow... Thanks for confirming these cameras are seriously garbage...5 V1 over two years without major problems. SD card problems and overwritin g problems:yes. But over all still working. ( Two needed a replacement of the mainboard. Then ok) 1 V1 dead after a week.( Now spare part)
4 V2 more than one year and still working without trouble. But I dont know yet which one is the better one...if you do not want to switch to Dahua...
You can dump rootfs from the working v1 cam? I flashed the wrong firmware. Instruction how to do I have.5 V1 over two years without major problems. SD card problems and overwritin g problems:yes. But over all still working. ( Two needed a replacement of the mainboard. Then ok) 1 V1 dead after a week.( Now spare part)
4 V2 more than one year and still working without trouble. But I dont know yet which one is the better one...if you do not want to switch to Dahua...
What is wrong with you? First you say you had no major problems and then you say you have to replace two main boards and one is completely dead? How are those not major problems... Three of your five cameras failed completely....wow... Thanks for confirming these cameras are seriously garbage...
So two cameras failed, that is not minor...lots of great Alternatives that have much better mechanisms that will cost less than replacing parts and cameras with a camera fails it's useless..
Flashing the wrong firmware is my problem not the camera One had an electrical issue and the other one I dont remember But you are right, they are garbage with a lot of minor problems. But there is no alternative for this price.
Yes - the procedures are very similar, the difference in the loader - we have U-boot, and in the filesystem - in v.1 - only 2 mtdblocks