Hello
I'm unable to setup the wifi on a DS-2CV2Q212FD-IW camera.
Here are the steps I follow, thanks for your help :
Using internet explorer, when trying to connect to the IP address of the camera (wired), i have the following message : Access Error: 404 -- Not Found Can't locate document: /
Using Hik-Connect app, the camera is power on, offline.
I select add a device
I scan the QRcode of the camera DS-2CV2Q212FD-IW
I click on « connect to a network »
I select « Wireless camera »
I follow the steps to make a reinit of the device
I connect a network cabel to the camera (wired – same subnet)
The last voice message of the camera is « the deveice is added to the platform successfully »
On Hik-Connect : After entering wifi credentials, i click on next
After a few seconds, I enter the verification code as requested
I arrive on a screen « Add finished »
I enter the name of the camera, auto for port mapping, and admin password, then click terminate
The camera and image is visible in hik-vision.
-- The device does not appear as connected to the network via wifi
I power off, unplug the network cable, and power on
The camera says the following messages « Hello », « you’re device is ready for network connection. Please add you’re device to the mobile client software and complete configuration »
-- The device is still not connected to the network via wifi
I'm unable to setup the wifi on a DS-2CV2Q212FD-IW camera.
Here are the steps I follow, thanks for your help :
Using internet explorer, when trying to connect to the IP address of the camera (wired), i have the following message : Access Error: 404 -- Not Found Can't locate document: /
Using Hik-Connect app, the camera is power on, offline.
I select add a device
I scan the QRcode of the camera DS-2CV2Q212FD-IW
I click on « connect to a network »
I select « Wireless camera »
I follow the steps to make a reinit of the device
I connect a network cabel to the camera (wired – same subnet)
The last voice message of the camera is « the deveice is added to the platform successfully »
On Hik-Connect : After entering wifi credentials, i click on next
After a few seconds, I enter the verification code as requested
I arrive on a screen « Add finished »
I enter the name of the camera, auto for port mapping, and admin password, then click terminate
The camera and image is visible in hik-vision.
-- The device does not appear as connected to the network via wifi
I power off, unplug the network cable, and power on
The camera says the following messages « Hello », « you’re device is ready for network connection. Please add you’re device to the mobile client software and complete configuration »
-- The device is still not connected to the network via wifi