Simon Dolenec
n3wb
Hi.. I have problem with indoor unit DS-KH6310W, latest baseline FW 1.5.1 that I can not show Hikvision PoE camera from NVR 7600 series. Indoor unit is connected via LAN cable.
I can normally see video in browser, NVR, via HIK-,Connect and even in Home Assistant.
Sub channel is enabled, so probably this can not be the problem..?
But in indoor unit I have problem.
Do anybody know what can be problem?
If I try to use 102 or 101 as unit number the device do not connect and throw error on start of showing video.
NVR device is set as 255 and camera as 88 unit number.
Did anybody has similar or same experience, did I miss something.. some setting somewhere?
Thank you for support.
I can normally see video in browser, NVR, via HIK-,Connect and even in Home Assistant.
Sub channel is enabled, so probably this can not be the problem..?
But in indoor unit I have problem.
Do anybody know what can be problem?
If I try to use 102 or 101 as unit number the device do not connect and throw error on start of showing video.
NVR device is set as 255 and camera as 88 unit number.
Did anybody has similar or same experience, did I miss something.. some setting somewhere?
Thank you for support.
Attachments
Last edited:
