Hello,
I have setup a new Blue Iris system with Amcrest IP2M-841EW and Reolink Cameras. With Amcrest camera I see ghosting artifact in the recorded clips. The issue is seen in only when there is motion. The record is done using 'direct to disc' ( no transcoding ) method. There is no issue in the live video during motion. Issue is seen only in the recorded clips. I don't see the issue in reolink cameras. CPU load is around 20 to 30%. PC uses Intel 5 with QuickSync ( custom made few years ago )
I did some googling and did couple of things.
1. Fps set as I-Frame interval ( both 30 as of now )
2. Receive buffer increased to 20MB.
I believe things are improved now, but still I see ghosting during motion in the recorded clips. Any help is appreciated. I have setup the Blue iris to record only during motion.
I have setup a new Blue Iris system with Amcrest IP2M-841EW and Reolink Cameras. With Amcrest camera I see ghosting artifact in the recorded clips. The issue is seen in only when there is motion. The record is done using 'direct to disc' ( no transcoding ) method. There is no issue in the live video during motion. Issue is seen only in the recorded clips. I don't see the issue in reolink cameras. CPU load is around 20 to 30%. PC uses Intel 5 with QuickSync ( custom made few years ago )
I did some googling and did couple of things.
1. Fps set as I-Frame interval ( both 30 as of now )
2. Receive buffer increased to 20MB.
I believe things are improved now, but still I see ghosting during motion in the recorded clips. Any help is appreciated. I have setup the Blue iris to record only during motion.