Last week I replaced a couple bullet cams with two 4MP HDBW4421R. They are 3 axis adjustable and 3.6mm. I bought them new from a vendor on ebay and one came with Chinese firmware and the other English...?? No big deal. The only thing I had to change was that they were set up to auto reboot at 2:30am every day and a couple minor adjustments. The motion lights work but are not powered yet so I'll have to see how that affects the cameras...
![inst-2.jpg](/data/attachments/5/5302-c05062bea4720ff2a6004f6aa1ef6865.jpg)
I mounted each cam on a PFB203W all aluminum wall mount from B&H photo. $16 each and comes with all mounting hardware.
The 203W is 122mm wide which fits the cam perfectly. There is also a couple other versions such as the 200W which is 200mm wide.
![inst-3.jpg](/data/attachments/5/5303-0f9f331662af60b235762ffea7446a81.jpg)
The back of the 203W has an access hole for cables and mounting holes.
![inst-4.jpg](/data/attachments/5/5304-4f8c59170f087921266b6151f0fb541d.jpg)
The back comes out so you can attach it to the wall first and then hang the camera and wall mount assembly on it. There is a small allen screw on the bottom that holds everything together. If I need to make an adjustment or clean it later on I just loosen the allen screw, unplug and take the whole assembly off.
![inst-5.jpg](/data/attachments/5/5305-89fa75896795762c1b933218347a34bc.jpg)
![inst-1.jpg](/data/attachments/5/5301-f7a0f47dd1f9d141626d05507c680165.jpg)
Just some info that hopefully might be of some help to someone.
![inst-2.jpg](/data/attachments/5/5302-c05062bea4720ff2a6004f6aa1ef6865.jpg)
I mounted each cam on a PFB203W all aluminum wall mount from B&H photo. $16 each and comes with all mounting hardware.
The 203W is 122mm wide which fits the cam perfectly. There is also a couple other versions such as the 200W which is 200mm wide.
![inst-3.jpg](/data/attachments/5/5303-0f9f331662af60b235762ffea7446a81.jpg)
The back of the 203W has an access hole for cables and mounting holes.
![inst-4.jpg](/data/attachments/5/5304-4f8c59170f087921266b6151f0fb541d.jpg)
The back comes out so you can attach it to the wall first and then hang the camera and wall mount assembly on it. There is a small allen screw on the bottom that holds everything together. If I need to make an adjustment or clean it later on I just loosen the allen screw, unplug and take the whole assembly off.
![inst-5.jpg](/data/attachments/5/5305-89fa75896795762c1b933218347a34bc.jpg)
![inst-1.jpg](/data/attachments/5/5301-f7a0f47dd1f9d141626d05507c680165.jpg)
Just some info that hopefully might be of some help to someone.