I just did that yesterday but it was with a dahua nvr. Whatever brand you are using shows dahua as a protocol, maybe change that port to 37777.Looking for a way to connect within the home network
can i see the camera visible on the nvr and work with same user and password of the vto.
but failed to add coretly and the camera shown is offline. anybody may have solution?
thank you.
View attachment 147672
try it yersterday.I just did that yesterday but it was with a dahua nvr. Whatever brand you are using shows dahua as a protocol, maybe change that port to 37777.
try to insert port 554 on rtsp and work with onvif. same issueWhat happens on port 554 & RTSP? Can't you pick ONVIF?
may is nesscary to connect the my vtns160a dahua poe device directly to nvr?What happens on port 554 & RTSP? Can't you pick ONVIF?
itsCan you draw your physical (how are your wires plugged & where) & logical (which IP address where). I was under impression you DID see the stream on your NVR, but your topi start post is cryptic and missing punctuation, so I'm now indeed worried your network isn't good.
Please provide (can be handdrawn!) network diagrams.
Thanks!
CC
True the range is actually 192.168.1.xx the nvr tcp/ip address is 192.168.1.19. Thank youOkay, that is your physical diagram. That is okay!
Can you now put your IP address of your NVR? I suspect it is in 192.168.1.x range, can you confirm? If not, there is the problem.