Here is how I did mine after heading down to my Local Home Depot, They didn't have the junction box I was looking for but I personally think this one worked out great
The tools I used
Junction box installed on the side of the Chimney
Making another trip to the hardware store to buy some tamper proof security screws
The tools I used
![](http://i51.photobucket.com/albums/f367/regalistic2003/20160319_105835_zps7gnrlpr2.jpg)
![](http://i51.photobucket.com/albums/f367/regalistic2003/Mobile%20Uploads/e8554c97-6d49-40b0-aa1e-8db7daf0d734_zpsy7ioymaj.jpg)
![](http://i51.photobucket.com/albums/f367/regalistic2003/Mobile%20Uploads/20160317_133524_zpsxeghfdcb.jpg)
![](http://i51.photobucket.com/albums/f367/regalistic2003/Mobile%20Uploads/20160317_133548_zps0voewbsb.jpg)
Junction box installed on the side of the Chimney
![](http://i51.photobucket.com/albums/f367/regalistic2003/Mobile%20Uploads/20160317_195559_zpsilvnktuh.jpg)
![](http://i51.photobucket.com/albums/f367/regalistic2003/Mobile%20Uploads/20160318_182444_zpst3fj2frp.jpg)
Making another trip to the hardware store to buy some tamper proof security screws
Last edited by a moderator: