hi,
i have a hikvision ds-2cd2112-i camera baseline firmware is 5.0.2 build 130805 last time and upgrad to 5.3.0 and it crash
SADP can't find camera,
only tftpd server(192.0.0.128 IP PC),
i try downgrade to 5.0.2 5.1.6 5.2.0 I tried but it did not help
when I run tftpd server i can telent to camera (192.0.0.64) and i have this massage:
(none) login: root
Password:
login: can't chdir to home directory '/root/'
BusyBox v1.19.3 (2012-12-17 13:59:08 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
format cfg pri partition and mount
mount: mounting /dev/ubi3_0 on /davinci failed: Device or resource busy
format cfg sec partition and mount
mount: mounting /dev/ubi4_0 on /config failed: Device or resource busy
cp: can't stat '/davinci/*': No such file or directory
recover cfg pri partition
cp: can't stat '/config/*': No such file or directory
pHardInfo->devSerialNo = DS-2CD-Min-System0120130927CCRR43531xxxx
[02-16 14:37:39][OTHER][ERROR]set_netmask ioctl error and errno=22 ifr_name = eth0
[02-16 14:37:39][SDKCMD][ERROR]setDeviceIpAddress: set_netmask failed.
---
# df
Filesystem 1K-blocks Used Available Use% Mounted on
mdev 48536 0 48536 0% /dev
/dev/ubi3_0 1300 16 1184 1% /davinci
/dev/ubi4_0 1300 16 1184 1% /config
/dev/ubi1_0 20028 9488 9500 50% /dav
/dev/ubi2_0 20264 9480 9732 49% /dav_sec
# mount
rootfs on / type rootfs (rw)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
ramfs on /home type ramfs (rw,relatime)
mdev on /dev type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
/dev/ubi3_0 on /davinci type ubifs (rw,relatime)
/dev/ubi4_0 on /config type ubifs (rw,relatime)
/dev/ubi1_0 on /dav type ubifs (rw,relatime)
/dev/ubi2_0 on /dav_sec type ubifs (rw,relatime)
# cat /proc/mtd
dev: size erasesize name
mtd0: 00020000 00020000 "bst"
mtd1: 00100000 00020000 "ptb"
mtd2: 00100000 00020000 "bld"
mtd3: 00100000 00020000 "hal"
mtd4: 00100000 00020000 "ano_ptb"
mtd5: 00080000 00020000 "env"
mtd6: 00080000 00020000 "param"
mtd7: 00100000 00020000 "dpt"
mtd8: 00a00000 00020000 "rcvy"
mtd9: 00800000 00020000 "krn_pri"
mtd10: 00800000 00020000 "krn_sec"
mtd11: 00400000 00020000 "rmd_pri"
mtd12: 00400000 00020000 "rmd_sec"
mtd13: 01800000 00020000 "app_pri"
mtd14: 01800000 00020000 "app_sec"
mtd15: 00400000 00020000 "cfg_pri"
mtd16: 00400000 00020000 "cfg_sec"
mtd17: 01000000 00020000 "dbg"
# ps
PID USER VSZ STAT COMMAND
1 root 2896 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW [kworker/u:0]
6 root 0 SW< [khelper]
7 root 0 SW [kworker/u:1]
54 root 0 SW [sync_supers]
56 root 0 SW [bdi-default]
58 root 0 SW< [kblockd]
173 root 0 SW [kswapd0]
174 root 0 SW [fsnotify_mark]
175 root 0 SW< [aio]
177 root 0 SW< [crypto]
199 root 0 SW [mtdblock0]
204 root 0 SW [mtdblock1]
209 root 0 SW [mtdblock2]
214 root 0 SW [mtdblock3]
219 root 0 SW [mtdblock4]
224 root 0 SW [mtdblock5]
229 root 0 SW [mtdblock6]
234 root 0 SW [mtdblock7]
239 root 0 SW [mtdblock8]
244 root 0 SW [mtdblock9]
249 root 0 SW [mtdblock10]
254 root 0 SW [mtdblock11]
259 root 0 SW [mtdblock12]
264 root 0 SW [mtdblock13]
269 root 0 SW [mtdblock14]
274 root 0 SW [mtdblock15]
279 root 0 SW [mtdblock16]
284 root 0 SW [mtdblock17]
293 root 0 DW [rxdma_check]
324 root 2896 S /sbin/inetd -f -e /etc/inetd.conf
325 root 2900 S -/bin/sh
326 root 2896 S init
334 root 0 SW [kworker/0:1]
415 root 0 SW [ubi_bgt3d]
422 root 0 SW [ubifs_bgt3_0]
432 root 0 SW [ubi_bgt4d]
439 root 0 SW [ubifs_bgt4_0]
459 root 0 SW [ubi_bgt1d]
468 root 0 SW [ubifs_bgt1_0]
482 root 0 SW [ubi_bgt2d]
489 root 0 SW [ubifs_bgt2_0]
509 root 32764 S /bin/davinci
529 root 3260 S /sbin/telnetd -w10
530 root 2900 S -sh
538 root 2900 R ps
what can I do ?
thx
i have a hikvision ds-2cd2112-i camera baseline firmware is 5.0.2 build 130805 last time and upgrad to 5.3.0 and it crash
SADP can't find camera,
only tftpd server(192.0.0.128 IP PC),
i try downgrade to 5.0.2 5.1.6 5.2.0 I tried but it did not help
when I run tftpd server i can telent to camera (192.0.0.64) and i have this massage:
(none) login: root
Password:
login: can't chdir to home directory '/root/'
BusyBox v1.19.3 (2012-12-17 13:59:08 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
format cfg pri partition and mount
mount: mounting /dev/ubi3_0 on /davinci failed: Device or resource busy
format cfg sec partition and mount
mount: mounting /dev/ubi4_0 on /config failed: Device or resource busy
cp: can't stat '/davinci/*': No such file or directory
recover cfg pri partition
cp: can't stat '/config/*': No such file or directory
pHardInfo->devSerialNo = DS-2CD-Min-System0120130927CCRR43531xxxx
[02-16 14:37:39][OTHER][ERROR]set_netmask ioctl error and errno=22 ifr_name = eth0
[02-16 14:37:39][SDKCMD][ERROR]setDeviceIpAddress: set_netmask failed.
---
# df
Filesystem 1K-blocks Used Available Use% Mounted on
mdev 48536 0 48536 0% /dev
/dev/ubi3_0 1300 16 1184 1% /davinci
/dev/ubi4_0 1300 16 1184 1% /config
/dev/ubi1_0 20028 9488 9500 50% /dav
/dev/ubi2_0 20264 9480 9732 49% /dav_sec
# mount
rootfs on / type rootfs (rw)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
ramfs on /home type ramfs (rw,relatime)
mdev on /dev type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
/dev/ubi3_0 on /davinci type ubifs (rw,relatime)
/dev/ubi4_0 on /config type ubifs (rw,relatime)
/dev/ubi1_0 on /dav type ubifs (rw,relatime)
/dev/ubi2_0 on /dav_sec type ubifs (rw,relatime)
# cat /proc/mtd
dev: size erasesize name
mtd0: 00020000 00020000 "bst"
mtd1: 00100000 00020000 "ptb"
mtd2: 00100000 00020000 "bld"
mtd3: 00100000 00020000 "hal"
mtd4: 00100000 00020000 "ano_ptb"
mtd5: 00080000 00020000 "env"
mtd6: 00080000 00020000 "param"
mtd7: 00100000 00020000 "dpt"
mtd8: 00a00000 00020000 "rcvy"
mtd9: 00800000 00020000 "krn_pri"
mtd10: 00800000 00020000 "krn_sec"
mtd11: 00400000 00020000 "rmd_pri"
mtd12: 00400000 00020000 "rmd_sec"
mtd13: 01800000 00020000 "app_pri"
mtd14: 01800000 00020000 "app_sec"
mtd15: 00400000 00020000 "cfg_pri"
mtd16: 00400000 00020000 "cfg_sec"
mtd17: 01000000 00020000 "dbg"
# ps
PID USER VSZ STAT COMMAND
1 root 2896 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW [kworker/u:0]
6 root 0 SW< [khelper]
7 root 0 SW [kworker/u:1]
54 root 0 SW [sync_supers]
56 root 0 SW [bdi-default]
58 root 0 SW< [kblockd]
173 root 0 SW [kswapd0]
174 root 0 SW [fsnotify_mark]
175 root 0 SW< [aio]
177 root 0 SW< [crypto]
199 root 0 SW [mtdblock0]
204 root 0 SW [mtdblock1]
209 root 0 SW [mtdblock2]
214 root 0 SW [mtdblock3]
219 root 0 SW [mtdblock4]
224 root 0 SW [mtdblock5]
229 root 0 SW [mtdblock6]
234 root 0 SW [mtdblock7]
239 root 0 SW [mtdblock8]
244 root 0 SW [mtdblock9]
249 root 0 SW [mtdblock10]
254 root 0 SW [mtdblock11]
259 root 0 SW [mtdblock12]
264 root 0 SW [mtdblock13]
269 root 0 SW [mtdblock14]
274 root 0 SW [mtdblock15]
279 root 0 SW [mtdblock16]
284 root 0 SW [mtdblock17]
293 root 0 DW [rxdma_check]
324 root 2896 S /sbin/inetd -f -e /etc/inetd.conf
325 root 2900 S -/bin/sh
326 root 2896 S init
334 root 0 SW [kworker/0:1]
415 root 0 SW [ubi_bgt3d]
422 root 0 SW [ubifs_bgt3_0]
432 root 0 SW [ubi_bgt4d]
439 root 0 SW [ubifs_bgt4_0]
459 root 0 SW [ubi_bgt1d]
468 root 0 SW [ubifs_bgt1_0]
482 root 0 SW [ubi_bgt2d]
489 root 0 SW [ubifs_bgt2_0]
509 root 32764 S /bin/davinci
529 root 3260 S /sbin/telnetd -w10
530 root 2900 S -sh
538 root 2900 R ps
what can I do ?
thx